Hot Sale Coilstand Support Set [v50lMoxj]

• Supports FinCap and all JAWS screed chairs
• Accepts 1/2′′ x 6 right-hand threaded coil rod
• 1-3/4′′ (45mm) vertical adjustability with nut and washer
• Stay-in-place form secures to wood deck with nails or to metal deck with screws
• Snaps into theBase Plate 4.5 for expanded use
• Holds up to 1,000 lbs when used with the FinCap with a steel threaded rod assembly
• Non-conductive and non-corrosive construction makes them ideal to use in bridge decks, waterways, and power plant concrete projects
• 100 CoilStands per bag, enough for 3,000 sf (278 sq m)
• Made in USA

• CoilStand product data sheet link

The CoilStand is made of impact resistant material and is virtually unbreakable. It can be used in a variety of ways on multiple surfaces. The FinStand supports the FinCap or JAWS screed supports with a 1/2″ x 6 right-hand thread coil rod. The stand can be adjusted 1.75″ (45 mm) using a nut and washer to accommodate any variation in the deck. See the chart below for rod length needed for the desired floor depth. The FinStand secures to a metal deck using #8 or #10 tek screws or nails for a wood deck.