In Stock 9.5" Height Flexible Steel Edging - Weathering Steel Collection [WqVrUhun]

Ideal for

• Organic and flowing lines
• Raised, curved feature gardens
• Kitchen garden beds
• Curved, sweeping terraces/retainers
• Hard surface mounting i.e. rooftops/decking
• Raised border edging
• Medium height retainers

Details

• Large Panels - 2 Per Box 
  • 9.5 inch high, (2) 71 inch long sections (12 feet per box)
• Medium Panel - 2 Per Box 
  •  9.5 inch high, (2) 31.5 inch long sections (approx5.25 feet per box)
• Filler Pack
  • (2) - 15.75" Sections
  • (2) - 8" Sections
• 2 mm thick, 8mm top edge.
• Preformed corners are 4 inches each side of the 90 degree bend.

What's Included

• Included with each section are Long twisted nails and the connectors.  Tek screws and driver bit are also included if you are purchasing the anchor posts.
• Not included is the anchor posts, universal bracing, preformed corners and joining sleeves.
• See details regarding bracing and joining sleeves below

Installation

Download Brochure

Bracing

• Bracing Kits sold separately as singles.
• Required in most installations
• Choose between the Universal Bracing or Anchor Posts (or a combo).  Universal Bracing recommended for the easiest installation.
• Recommended quantity
  • 2 per section for the 71" Panels
  • 1 per section for the 31.5" Panels

If you choose to go with the anchor posts are installed by tek screwing to the side of the ribs (brackets) on the back of the edging.  The screws are self tapping, and will go into the post without the need for pre-drilled holes.

Joining Sleeves

• Joining sleeves are only needed if you are cutting the edging (therefore cutting off the built in connections) and then need to rejoin the edging.