Warehouse Clearance 27" Adjustable Height Galvanized Fabrication Work Table With 4 Levelers / Stabilizers Now 30% Cheaper [2mYvfCrF]

The Weha 27" Adjustable Height Galvanized Fabrication Work Table, including 4 Locking Posts and 4 Screw Leveler/stabilizers, is made specifically for fabricating granite, marble, quartz, quartzite, and stone counter tops, vanities, bar tops, etc.

This worktable is the most heavy duty, most solid work table that is made for stone fabrication. At over 200 lbs in weight, this is a beast of a work table. There were no shortcuts made in producing this premium work table.

The Weha 27" Adjustable Work Table are made out of heavy duty steel that will support 2cm, 3cm, and laminate granite, engineered stone, quartz, quartzite, and all stone without any problems at all.

The Weha 27" Adjustable Work Table has an open top that comes with 4 2 x 4 treated wood inserts. Easily replace them with standard 2 x 4 or 2 x 6 wood. The stone will sit on top of the wood to prevent scratches as well as to easily slide the wood around the sink and bowl opening for easier fabrication.

You can have as many 2x4 or 2x6 boards as you choose (Weha includes 4 wood inserts with the worktable). It works perfect for full support of sink and bowl cut outs. Do you need to fabricate a double vanity top? Simply move the 2x material between and on both sides of the vanity for full support.

With a weight capacity of 1100 lbs, practically any piece of granite or stone can be put on the Weha Adjustable fabrication work tables.

Push 2 of the Weha Galvanized Granite Work Tables together and an island can easily be fabricated and polished.

Simply lock multiple Weha Fabrication Tables together with C clamps or vice grips to create customized granite work stations and complete kitchen layouts to make sure kitchen lays out to the templates before installing.

The Weha 27" Adjustable Height Galvanized Stone Fabrication Counter Top Wood Insert Work table comes with 4 wood inserts for the top, 4 swivel casters with locks as well as 4 screw levelers/stabilizers.

• Hot dipped Galvanized. You pay a little more money up front, but this table will last 20+ years, more than 4 times longer than a painted table
• Adjustable height from 32"-44": This will fit any worker in the shop with the most comfort. Less fatigue.
• 27" Width: The perfect width for fabricating tops. It allows adjusting the top, as well as cutting bowls and sinks out inside the frame of the table.
• Wood Inserts: Using wood inserts for the top is cheap, doesn't scratch the tops, can cut into it, and easily slide them inside the table to support cutouts, between vanities, etc
• Levelers/Stabilizers: The 4 screw levelers/stabilizers (2 on each side) adjust for the slope of the floor, to line up seams on another table, as well as create stability and eliminate any movement from the table when fabricating

• Load Capacity: 1100 lbs
• Length: 84"
• Width: 27"
• Height: 32"-44"
• 4 swivel casters with locks
• 4 Screw levers/stabilizers
• Wood is included.