Top Pick Cobble Strip Set [tEpZKBGf]

Surface Logix's Top Pick Cobble Strip Set [tEpZKBGf] is an eco-friendly low odor paint stripper and concrete stripper designed to remove various types of coatings.  

Top Pick Cobble Strip Set [tEpZKBGf] performs by penetrating and softening the paint film. Top Pick Cobble Strip Set [tEpZKBGf] will remove most sealers, paints, and concrete stains, both solvent and water based.

Preparations: Before applying Top Pick Cobble Strip Set [tEpZKBGf], ensure all areas not being stripped are fully protected. Ensure all surfaces are dry prior to stripping. Water will deactivate the stripping action.

Applications: Stir the product thoroughly before use. Top Pick Cobble Strip Set [tEpZKBGf] should be applied directly from the container using a roller, or sprayer.

Apply a liberal amount of Surface Logix's Top Pick Cobble Strip Set [tEpZKBGf] to the surface requiring stripping. Work Top Pick Cobble Strip Set [tEpZKBGf] into grooved areas.

Allow Top Pick Cobble Strip Set [tEpZKBGf] to stand for a minimum of 30 minutes. Weather conditions, type of coating being removed, and coating thickness will determine how long Top Pick Cobble Strip Set [tEpZKBGf] must dwell for stripping action to develop. 

After softening of paint film begins and film starts to wrinkle, or blister begin to pressure wash the coating off of the substrate. Water will deactivate the stripper. When removing the stripper with water, ensure that rinse water does not contact areas that have not yet been stripped.

Do NOT allow Top Pick Cobble Strip Set [tEpZKBGf] to dry prior to removing it. When stripping large areas, it is recommended to divide into smaller sections and strip one section at a time rather than attempting to strip the entire project.

TDS Report