AiM Solo2 DL CAN/RS232 Wiring Harness

If you routinely move your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo2 DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the CAN inputs.

The AiM V02569050 harness connects your Solo2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo2 DL, and the other end has six non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).

Does not fit original AiM Solo DL.

AiM Solo2 DL CAN/RS232 Wiring Harness Details

• Manufacturer: AiM Sports
• Manufacturer part number: V02589050
• Fits Solo DL: No
• Fits Solo2 DL: Yes
• Pins on AiM Solo2 DL Side: 7-pin thread-on connector
• Vehicle Chassis Ends: six non-terminated wires
• Vehicle Chassis Ends Break Out: Red=12VDC, Black=Ground, Blue=ECU RS232 TX, Blue=ECU RS232 CAN-, Gray=ECU RS232 RX, Gray CAN+

AiM Solo 2 DL CAN/RS232 Wiring Harness Wiring Code

• Red: +9 to +15 VDC
• Black: Ground
• Grey: CAN+
• Blue: CAN-
• Black: ECU RS232 RX
• Blue: ECU RS232 TX

Both blue wires are the same color, but each wire has an identifier tag stating the connection type