Pet Friendly Narvi Ceramic Glass 4 X210 X170 Starter Kit [ob6Zelci]

Here's the precise information for replacing the 4mm × 210mm × 170mm ceramic glass for your Narvi stove:

Product ID: 85059

Narvi Ceramic Glass Replacement (4×210×170mm)

1. Critical Specifications

• Exact Dimensions: 210mm (height) × 170mm (width) × 4mm (thickness)

• Material: Ceramic glass (Schott Robax/Pyroceram equivalent)

• Thermal Properties:

  • Continuous resistance: 800°C (1472°F)

  • Peak resistance: 1200°C (2192°F)

• Edge Treatment: Polished edges (some models require black enamel border on one side)

2. OEM Replacement Options

• Direct from Narvi Finland

  • Part number: Typically "NG-210170" (confirm via [email protected])

  • Lead time: 4-8 weeks internationally

  • Cost: €90-140 + shipping

4. Installation Guide

1. Remove Old Glass

   • Use T20 Torx driver for Narvi's retention system

   • Preserve original gasket material for reference

2. Prepare New Glass

   • Clean with vinegar (no ammonia-based cleaners)

   • Verify black border orientation (if present)

3. Installation

   • Apply new fiberglass gasket rope (3-5mm diameter)

   • Secure with original clamps (35-40 in-lb torque)

   • Cure by heating gradually to 300°C over 2 hours

5. Important Warnings

• Never use:

  • Tempered glass

  • Ordinary glass ceramics

  • Glass with scratches/chips

• Expansion clearance: Maintain 1.5mm gap on all sides

6. Performance Verification

After installation:

1. Check for even heat distribution (no dark spots)

2. Listen for cracking sounds during first heating

3. Monitor gasket integrity after 10 heating cycles

Would you like help:

• Confirming your specific Narvi model's glass requirements?

• Finding a faster shipping option in your region?

• Troubleshooting installation issues?

Please share your stove model number or location for tailored advice.