All-in-one Orthoplasty Silicone - Rigid Hardness - Shore A 35 - Silipod Series [LrUFocev]

Rigid orthoplasty silicone - SILIPOD

Polyaddition polyvinylsiloxane silicone (paste / paste) packaged in 2 pots of 250gr, in the form of 2 pastes allowing, once mixed in equal parts, to carry out any type of orthoplasty in a few minutes.

Very easy milling and beautiful finishes - Elongation 130% - Resistance 5 kn/m

Composition: Polyvinylsiloxane polyaddition

Manual :
Wash your hands especially if you have worn gloves
• Take an equal part of dough from pot B* with the colored spoon and from pot C* with the white spoon.
• Be careful never to mix up the spoons or lids.
• Mix the two doughs for a maximum of 30 seconds evenly
• Carry out the orthoplasty: Working time +/- 4 min depending on the ambient temperature , your hands, the patient's foot
• After catalysis (cross-linking) +/- 4 min, gently unmold the orthoplasty

Advice: Immerse the orthoplasty in hot water +/- 3 min (tap temperature) to accelerate catalysis and stabilize the silicone
Immediate pre-sanding and pre-finishing and finishing after 24 hours
Storage : Close the jars after use and store them at room temperature +/- 20°C
Guarantee: Products must be tested upon receipt and any problem reported within the following 15 days for a possible exchange.