Kid Approved Aseptanios Ad - Airborne Disinfection - 2l Or 5l - Anios Check It Out [rbNS2aHM]

ASEPTANIOS AD Disinfectant for surfaces and medical devices

Use biocides with caution. Before use, read the label and product information.

SECURITY
Product without aldehyde, without heavy metals
Peracetic acid-based product: corrosion control
ASEPTANIOS AD - AEROSEPT ULTRA 150 / AEROSEPT COMPACT 250 / AEROSEPT 500 processes validated

EFFICIENCY
Broad spectrum from 30 minutes
Leaves no trace when drying, nor any greasy film on surfaces after aerosolization

SIMPLICITY
Ready-to-use product
Automatic calculation of diffusion time by AEROSEPT ULTRA 150, AEROSEPT COMPACT 250 and AEROSEPT 500

FEATURES
Use outside human presence
Clear, colorless solution
Usable in Aerosept Ultra 150, Aerosept Compact 250 and Aerosept 500 diffusers
Consumption: 7 ml / m³

COMPOSITION
Stabilized solution of peracetic acid (CAS No. 79-21-0: +/- 1200 ppm) and hydrogen peroxide.

PRECAUTIONS FOR USE
Dangerous - follow the precautions for use (established according to current European rules on the classification and labeling of chemical products).

Storage: between +5°C and 25°C IN AN UPRIGHT POSITION

Use biocides with caution. Before use, read the label and product information. Biocidal product intended for surface disinfection (Group 1-TP 2) - for professional use only.

MICROBIOLOGICAL PROPERTIES
ASEPTANIOS AD solution is bactericidal (EN 1040, EN 1276, EN 13697), fungicidal (EN 1275, EN 1650, EN 13697), mycobactericidal (EN 14348, EN 13697), virucidal (EN 14476), sporicidal (EN 13704).

The ASEPTANIOS AD – AEROSEPT COMPACT 250 process is effective according to the French standard NF T 72-281 – 7ml/m3 - 55°C.

INSTRUCTIONS FOR USE
1. Insert the can into the AEROSEPT ULTRA 150 / AEROSEPT COMPACT 250 / AEROSEPT 500. Place the device in a corner of the previously cleaned room. Adjust the programming by calculating the volume to be treated.
2. Activate the atomizer and leave the room.
3. The broadcast starts. The broadcast time is automatically calculated based on the volume you have set.
4. Respect the contact time according to the desired antimicrobial activity. Then, wear a protective mask when entering the room. Ventilate the room effectively (5 air changes) before reusing the room.

NB: check with ANIOS Laboratories that the product is compatible with materials sensitive to oxidants.