Pet Friendly Fully Automatic Pouch Cell Assemble Line For Battery R&d - Msk-bpa-s Flash Sale: 80% Off [GNCIdjTO]

No.

Name

Main Functionalities

Numbers

Note

1

MSK-BPA-LA1016

Auto Cutter

Unwinding roll alignment, positive/negative electrode side confirmation, electrode connection test, electrode tension control, electrode cutting, waste collection, double-side dust removal, electrode buffer transportation, cutting environment monitoring.

2 units

Cathode/Anode

2

MSK-BPA-SC1016

Auto Stacker

CCD measurement of electrode defects, dimension checking, CCD positioning of electrode, tension control of separator, separator alignment, static removal of separator, automatic Z-type stacking, automatic tape sealing, Hi-pot test on stacked cell, stacking environment monitoring.

1 unit

3

MSK-BPA-WT1016

Auto Welder/Taper

Pre-welding of cathode and anode tabs, tab cutting, waste collection, final welding of cathode and anode tabs, taping on tab, beauty shaping of tab welding points, CCD measurement of tab welding, and welding environment monitoring.

1 unit

4

MSK-BPA-STS1016

Auto Case Former and Top/Side Sealer

Pouch case formation, code spraying on pouch case, stacked electrode placement inside pouch case, folding of pouch case, top/side hot sealing, Hi-pot short-circuit test, environment monitoring.

1 unit

5

MSK-BPA-IS1016

Auto Electrolyte Injector

Recognition of cell codes, weight before electrolyte filling, electrolyte injection, standing, vacuum pre-sealing, weight after electrolyte injection, injection environment monitoring.

1 unit

6

MSK-BPA-DT1016

Auto Gas Tightness Tester

Cell code reading, inner resistance test, voltage test, gas tightness test, cells in collector

1 unit

7

MSK-BPA-MES

Auto MES Unit

To monitor machine status, collect technical and environmental parameters, and track cell code data

1 set

Project

MSK-BPA-S1016 Automatic Pilot Line for Pouch Cell

Design Production Rate

0.5 pcs/min

Stacked Cell Dimension

Max.100*160*12mm (dimension can be customized)

Tab Orientation

Single-side tab direction

Rolls Loading

Cathode, separator, and anode rolls

Cells Unloading

Cell collection box

Temperature/Humidity

All sealing design, humidifier for achieving 23℃ and dew point of -60℃

Cleanliness

Additional dehumidifiers for providing a 100K level of GMP

Power Requirement

AC380 V, three phase, total power is 50 kw for all six modules

Compressed Air

0.6-0.8Mpa，dry and oil-less

Vacuum Requirement

Vacuum level low than -98KPa

Inert Gas Requirement

0.6Mpa

Installation Space

All pilot line：L18500mm×W1600mm×H2450mm

Installation Dimension：L20000mm×W3500mm×H2700mm

Device Weight

Around 8 metric tons