Most Wishlisted Impact Rc 2025 Ruler 1/10 Rubber Tire Pan Car Conversion Set [LGqJMrtZ]

The 2025 Ruler builds on the success of the original Ruler kit that has won many races including 13.5 RTT at the 2024 Putnam Memorial at PRW and 13.5 RTT at the 2024 Tour Nationals at APEX Raceway and Hobbies.

New for 2025, is an added transponder mounting pocket in the left front, improved weight mounting spacing, as well as improved and squared up geometry.

We also narrowed the battery pocket for a tighter fit for the battery, squared up the ESC pocket and moved the left cross brace standoff to the front of the crossbrace to give more ESC room. We also shortened the ESC area of the chassis to give better tire clearance.

This chassis uses Hyperdrive brass bolt-on weights. There are also precision cut brass and stainless steel weight options available for this chassis. No weights are included with the base kit except the battery locators.

This Conversion comes with Chassis, Rear Pod, T-Plate, all carbon and hardware and in general most of what the Kit includes except Front End, Rear Axle, Shocks, Springs, Spur, Body Posts, Bearings, Servo Mount, or Turnbuckles and misc. accessories.

Includes:
2025 Ruler Chassis
Outkast V2 bumper (works with RTT or RTC)
Front/rear aluminum body mounts
Outkast V1 Cross Brace
GFRP/Hyperdrive Brass Battery Locators
Aluminum cross brace standoffs
2025 Rear Pod (1/12 scale base height with 1/10 shims)
Carbon nerf bar
Center shock mount w/ aluminum base
Spring Steel T-Plate (0 Degree)
GFRP .1" T-Plate Spacers
Machined pivot sockets
RPM Rod Ends

Not shown but included: 
Includes full black aluminum hardware (screws, ball studs, locknuts)
Stainless Steel screws are used for T-Plate mounting as well as M3 hardware to secure Axle Ride Height Adjusters to Lower Pod Plates

Does not include:
Servo Mount (unless chosen)
Frontend Accessories (turnbuckles, ball studs, rod ends, RT ride height spacers)
Shocks
Axle
Bearings

The chassis is drilled for a Futaba 9650 sized servo, and can use traditional CRC-style angled servo mounts if desired. We also have a variety of Carbon Servo Mount w/ Delrin bases. You will also need 48mm turnbuckles, steering ballstuds, and rod ends.