Complete Thermometer | Rapt Bluetooth Solution [zmWFuSnq]

• Make your Gen 4 BrewZilla even smarter by pairing it with the RAPT Bluetooth Thermometer
• Take mash temp readings from the top and bottom of your grain bed simultaneously
• Set a temperature differential between the readings to enable the BrewZilla RAPT controller to more accurately maintain temps and perform mash steps
• Monitor coolant water temps during distillation runs and set alarms to alert you if the temperature is too high
• Automatically log brew days with detailed information to your RAPT Portal account
• Huge temperature range from -4°F to 572°F is easy to read on the backlit digital display
• Orange backing plate can clip to the rim of your BrewZilla and is also magnetic
• AAA batteries included

This low energy, RAPT-enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices.

By receiving multiple BLE (Bluetooth Low Energy) thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process. For example, the BLE thermometer probe can be put into the middle of the malt pipe so the BrewZilla can more accurately control elements switching on/off to achieve a core malt pipe temperature, or the thermometer can be placed into your coolant water during distillation runs so you get an alarm if the temperature is too high.

RAPT Connectivity
The new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, or RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to send push notifications to your mobile phone of when it's time to begin sparging or begin other steps in your brewing process.

Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer!

Specifications:

• Temp Range: -4°F – 572°F (-20°C – 300°C)
• Probe Length: 8" (20 cm)
  • Note that the probe tip is very sharp
  • Remove black plastic tip before use
  • Plastic tip should be used for storage to avoid punctures / injury
• Cable Length: 39" (100 cm)
• Magnetized Backing Plate (Orange)
• 2 x AAA Batteries (included)