Discover Anti-surge T3 Turbocharger For Gt35 Gt3582 600hp | Uni. - Going Fast [ZJ0zH57x]

GT35, GT3582 Turbo Charger T3 AR.70/63 Standard Anti Surge Compressor Turbocharger 

Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. GT35 for GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power. 

Item number: 3002917779     

• * Cost-effective Turbo increase 20-40% power for your car
• * Ductile Iron QT450-10- Temperature resistance up to 700℃
• * K418 Alloy- High oxidation resistance& stability (resistance up to 900℃)
• * Cast Aluminum Blades-Great Air Tightness & Corrosion Resistance
• * Horse Power Boost up to 600HP
• * Excellent Design: Durable floating bearing structure & high-precision blade dynamic balance
• * 100% Balancing Test: This turbocharger you will receive has been balanced using the VSR machine technology

Application:

This turbo is a universal application street turbo, some modification may be required based on the individual vehicle.
Perfect for all 4/6 cylinder and 2.5L-6.0L engines
Horse Power: Capable of Boosting Horse Power up to 600HP
** WARNING： Lacking oil will cause turbocharger shaft play and damage, please adjust your oil pressure and make sure turbocharger is fully lubricated

Anti Surge Turbo Specification: 

Exhaust Inlet (Turbo Manifold) Flange: T3 Flange
Exhaust Outlet (Downpipe) Flange: 4-Bolt
Turbine Trim: 84.2
Turbine A/R: 0.63
Turbine Inducer Diameter: 68mm
Turbine Ex-ducer Diameter: 62.4mm
Compressor Trim: 56.9
Compressor A/R: 0.7
Compressor Inducer Diameter: 61.5mm
Compressor Ex-ducer Diameter: 81.5mm
Compress Inlet Size(Air intake): 4 inch (103.5mm)
Compressor Outlet Size: 2.5 inch (63.6mm)
Bearing Type: Wet Float
Cooling Type: Water + Oil
Internal Waste=gate: No
Warranty: one year for any manufacturing defects
Compress Inlet Size(Air intake): 4 inches (103.5mm)
Compressor Outlet Size: 2.5 inches (63.6mm)
Waste-gate： External Waste-gate
Oil feed/inlet: M10*7/16-24
Oil drain/outlet: 2*M8*1.25
Water inlet/outlet: M14* 1.5
Maximum PSI：22
Package Weight: 8350g
Package Size: 26*25*23 cm

Features: 

1) Product Material：
1. Turbine housing ：Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius.
2. Steel Turbine Wheel: Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius.
3. Compressor housing：ZL104 aluminum.
4. Compressor wheel/blades:
Cast aluminum with good gas tightness and corrosion resistance.
5. Max HP： UP to 600hp.
2) Product Feature:
1. Excellent Design:
Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance.
2. Durable:
Water-cooled/oil-cooled structure extends turbine service life.
3. 100% BALANCING TEST: This Turbocharger you will receive has been balanced using the VSR machine technology.

• This product has met EPA's reasonable basis requirements and is legal for sale and use within the jurisdiction of the federal EPA. (EMS:2)

Installation Suggestions: 

We highly recommend you make sure the points below before installing:
1.Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage.
2.Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil.
3.After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately.
Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.

Note

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Gasoline car must install a water cooling device to avoid overheating.
* Ensure exhaust outlets are well sealed by welding.
* To protect the turbocharger and your car engine, an Air filter is necessary.
* Professional installation is highly recommended.
* For any needs please contact us.
* This is a universal application turbo, so modification might be required for some vehicles.