Hot Item Water Butterfly Valve Elephant Wbv1616n-2w-fb-h, Body Material - Cast Iron Qt450, Disk Material - Cast Iron Qt450, Seal - Nbr, Pneumatic Actuator Pa-da-105-1 Double Action, 4v320-08 220v, Lsu Apl-210n Kit [vJZuec6l]

Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.

Pneumatic rotary actuator is designed to automate the process of control of industrial valves, as well as to determine the position of the valve shut-off body.

Pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off body: valve, crane or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. The visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.

 

 

Technical parameters of Hot Item Water Butterfly Valve Elephant Wbv1616n-2w-fb-h, Body Material - Cast Iron Qt450, Disk Material - Cast Iron Qt450, Seal - Nbr, Pneumatic Actuator Pa-da-105-1 Double Action, 4v320-08 220v, Lsu Apl-210n Kit [vJZuec6l]:

Butterfly valves WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4V320-08 220V, LSU APL-210N

 

 

Dimensions and dimensions of butterfly valves Elephant WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4V320-08 220V, LSU APL-210N:

DN	H, mm	A, mm	E, mm
125	317.5	495	200
150	354.5	495	200

Sketch Butterfly valves WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4V320-08 220V, LSU APL-210N

 

 

Materials of butterfly valves Elephant WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4V320-08 220V, LSU APL-210N:

Sketch of parts and materials Butterfly valves WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4V320-08 220V, LSU APL-210N

 

 

Technical parameters of pneumatic actuator PA-DA-105-1:

Pneumatic actuator PA-DA-105-1

 

 

Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:

Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1

 

 

PA-DA-105-1 air actuator parts and materials table:

Parts and material sketch of the PA-DA-105-1 pneumatic actuator

 

 

Technical parameters of pneumatic valve 4V320-08 220V:

Name	meaning
Type of pneumatic valve	slide valve
Working pressure, bar	1.5 ÷ 8
Supply voltage, V	220 V
Total power, Va	4.5
Control	double-sided electromagnetic
Frequency of operation, cycle/sec	5

Pneumatic valve 4V320-08 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Pneumatic valve model	4V320-08
A, mm	71.9
B, mm	45
C, mm	94.4
D, mm	27
E, mm	69
F, mm	40
I, mm	24
K, mm	40
L, mm	188.8
M, mm	69.4
N, mm	50
O, mm	82.4
P, mm	24
S, mm	20
T, mm	6.5
U, mm	2.4
V, mm	4
H, mm	82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

 

 

Technical parameters of limit switch unit APL-210N:

Name	Value
Model of limit switch unit	APL-210N
Maximum voltage of limit switch, V	250
Working environment temperature, °C	-40 to +80
Service life, years	10

Limit switch unit APL-210N

 

Dimensions and dimensions of the APL-210N limit switch unit:

Model	H, mm	L, mm	B, mm	D, mm	D1, mm	M
APL-210N	77	112	88	10	5	20x1.5

Sketch of dimensions and dimensions of limit switch unit APL-210N