Bestselling Mjjc Foam Cannon S V3.0 For Karcher K For A Limited Time [cXFI5ehS]

Compatible with below Pressure Washer Models#:

K1/K2/K3/K4/K5/K6/K7

What’s New with S V3.0

1. New Structure – easier and smoother to control 360-degree spray.
2. New Straw Tube – easier to consume all the liquid in bottle.
3. New Bottle and Cap – easier to attach bottle to foam cannon body.
4. New Foam Technology – thicker and shaving cream foam.

More Features since Version 2.0

5. MJJC Connection/Fitting – easier and faster to attach fitting, no need glue or ptfe tape.
6. MJJC Foam Technology – less noise, less soap but thicker foam.
7. MJJC Style Bottle – less possibility to tip over.

Before Purchasing the MJJC Foam Cannon S V3.0, Please Ensure the Following:

 1.Check Your Pressure Washer's Operating Pressure

 Your pressure washer must operate at a minimum of 50 BAR/725 PSI.

 Each Foam Cannon S V3.0 comes pre-installed with a 1.25mm orifice, which is ideal for machines rated 110 Bar/1595 PSI ~ 150 Bar/2175 PSI.

 A 1.1mm orifice is included in the package. If your machine operates 90 Bar/1305 PSI ~ 110 Bar/1595 PSI, you can replace the original orifice with the 1.1mm version for better compatibility.

If your pressure washer falls outside these two ranges, please refer to below range to purchase the correct orifice size for optimal performance.

What is the pressure range for each orifice?

· 0.9mm orifice: for 50 Bar/725 PSI ~ 90 Bar/1305 PSI pressure washer

· 1.1mm orifice: for 90 Bar/1305 PSI ~ 110 Bar/1595 PSI pressure washer

· 1.25mm orifice: for 110 Bar/1595 PSI ~ 150 Bar/2175 PSI pressure washer

· 1.35mm orifice: for 150 Bar/2175 PSI ~ 280 Bar/4061 PSI pressure washer

· 1.65mm orifice: for 280 Bar/4061 PSI ~ 340 Bar/4931 PSI pressure washer

2.Confirm Your Pressure Washer Type

This foam cannon is designed for use with Cold Water pressure washers only. It is not compatible with hot water machines.

3.How to Select a Correct Foam Cannon Model? Check Here.