Believe It 18 Ram 1500 3.0l Diesel 3.92 Ecu Ecm Pcm Engine Computer Module 68359361 Tested Kit [6inL0lJF]

68359361

PCM requires programming before installation.

This PCM will interchange or replace the following part numbers:

68359361AA

68359361AB

68359361AC

68359361AD

68359361AE

68359361AF

68359361AG

68359361AH

68359361AI

68359361AJ

68359361AK

68359361AL

68359361AM

68359361AN

68359361AO

68359361AP

PCM has been tested with our state of the art vehicle simulator which tests over 25 circuits of the PCM! Some of those are listed below:
• Reference Voltage Good!
• PCM powered up and has communication!
• Starter, ASD and SCR relay circuits test good!
• Vaccum, DEF and Fuel Pump circuits test good!
• Wastegate, Swirl motor, TTVA and EGR circuits test good!
• PCM injectors and A/C clutch test good!

• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove the module to be replaced.
• Install and connect the replacement module.
• Connect the negative terminal of the battery.
• See "Programming" below for additional install instructions. 

For Plug and Play you must do the following three steps:

Step 1: Match your part number per above fitment/interchange notes

Step 2: Program PCM to your VIN. You will need your local mechanic, dealer or properly equipped locksmith to program your VIN into the PCM and apply any necessary updates. Without doing this you will get a "no start" condition. We recommend you have this done by your local locksmith. In most cases they will travel to your location and the process takes less than 30 minutes. No towing necessary and your local locksmith will be cheaper than a dealer.

• Mounting points are all open and intact
• Pins perfect, none are broken or bent
• There may be some minor chipped plastic on connector but lock tabs are place

This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.