Overstock Deal Tci Automotive 456005 10 Inch Drag Race Converter For 2005-2009 5r55s. - Today Only [cKCD3n0s]

TCI 9", 10" and 11" Drag Race Torque Converters can be run in applications with up to 750 horsepower and are most commonly used for a bracket race or street/strip application that leans more toward the "strip." Stall speeds vary depending on application but the average is 3800-4500 RPM for 9" and 10" converters and 3000 RPM for the 11" version. Furnace-brazed and reinforced fins increase durability. Needle bearings reduce drag and increase thrust capacity. Three sets of Torrington bearings replace normal thrust washers used in OEM and some aftermarket converters to triple the thrust capacity capabilities. Hardened steel pump hubs increase strength, durability and longevity while decreasing wear. Increased strength and holding capacity of high load sprags ensure stator stays locked when converter stalls and guarantees converter will stall correctly run after run. Ballooning plates (9" and 10" only) double strength of converter when using transbrake and/or power adders. 360 Degree Mounting Ring.

Resources

Installation Instructions

Resources

Installation Instructions

Specifications:

California Proposition 65	Warning: Cancer and Reproductive Harm P65Warnings.ca.gov
Description_ASC	For more accurate stall range, be sure to contact TCI Support with your vehicle's specifications. TCI techs will need to know your vehicle's weight, engine displacement, power adders, rear gear ratio, along with tire diameter.
Description_DEF	Automatic Transmission Torque Converter
Description_DES	10 Inch Drag Race Converter for 2005-2009 5R55S.
Description_EXT	This 10 Inch Drag Race Converter for 2005-2009 5R55S provides roughly 3800-4500 Stall.
Description_INV	10" 5R55S Converter
Description_MKT	TCI 9", 10" and 11" Drag Race Torque Converters can be run in applications with up to 750 horsepower and are most commonly used for a bracket race or street/strip application that leans more toward the "strip." Stall speeds vary depending on application but the average is 3800-4500 RPM for 9" and 10" converters and 3000 RPM for the 11" version. Furnace-brazed and reinforced fins increase durability. Needle bearings reduce drag and increase thrust capacity. Three sets of Torrington bearings replace normal thrust washers used in OEM and some aftermarket converters to triple the thrust capacity capabilities. Hardened steel pump hubs increase strength, durability and longevity while decreasing wear. Increased strength and holding capacity of high load sprags ensure stator stays locked when converter stalls and guarantees converter will stall correctly run after run. Ballooning plates (9" and 10" only) double strength of converter when using transbrake and/or power adders. 360 Degree Mounting Ring.
height	8.0
length	14.0
LTL	N
Title	10 Inch Drag Race Converter for 2005-2009 5R55S.
Torque Converter Series	Drag Race 10"
weight	39.0
width	14.0