Wholesale Icon Vehicle Dynamics 57840ep 22-23 Tundra 0-1.5"/23 Sequoia 0-3" Rear 2.5 Vs Cdev Rr Pair 75% Off - Today Only [Dais8kBL]

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are fully rebuildable and re-tunable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.

Specifications:

Add-On Part	252012 - -4 TO -10 HOSE SHIELD KIT
Add-On Part	53508 - 22-23 TUNDRA IIC INSTALL KIT
Add-On Part	58770E - 22-23 TUNDRA 2.5 VS RR CDEV COILOVER KIT
Add-On Part	58775E - 22-23 TUNDRA 3.0 VS RR CDEV COILOVER KIT
California Proposition 65	WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Cylinder Color	Grey
Cylinder Material	Aluminum
Damping Type	Oil
Description_ASC	TECH NOTE: Also requires installation of IIC kit (Part # 53508) and CDEV front coilovers (Part # 58770E or 58775E)
Description_ASC	TECH NOTE: Compatible with 0-1.5” of rear lift on non-TRD Tundras or 0-1" lift on TRD Tundras equipped with rear coil springs
Description_ASC	TECH NOTE: Compatible with 0-1” of rear lift on Tundras equipped with rear coil springs
Description_ASC	TECH NOTE: Compatible with 0-3” of rear lift on 2023 Sequoias equipped with rear coil springs
Description_ASC	TECH NOTE: Compatible with 0-3” of rear lift on Tundras equipped with rear OE Load-leveling Rear Height Control Air Suspension
Description_ASC	TECH NOTE: If upgrading a Tundra equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain functional
Description_ASC	TECH NOTE: If upgrading a vehicle equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain functional
Description_ASM	22-23 TUNDRA 0-1" REAR 2.5 VS CDEV RR PAIR
Description_ASM	ICON 22-23 TUNDRA 0-1.5"/23 SEQUOIA 0-3" REAR 2.5 VS CDEV RR PAIR
Description_DEF	Suspension Shock Absorber Set
Description_DES	22-23 TUNDRA 0-1" REAR 2.5 VS CDEV RR PAIR
Description_DES	22-23 TUNDRA 0-1.5"/23 SEQUOIA 0-3" REAR 2.5 VS CDEV RR PAIR
Description_EXT	ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs with CDEV and are 100% rebuildable/revalveable.
Description_FAB	6061 aircraft grade aluminum CNC machined components
Description_FAB	7/8” diameter induction hardened, chrome plated shock shaft
Description_FAB	Fully rebuildable and re-tunable
Description_FAB	ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
Description_FAB	ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
Description_FAB	Nitrogen charged monotube design with remote reservoir
Description_FAB	One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
Description_FAB	One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Description_FAB	Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Description_FAB	PTFE lined spherical bearings and application specific mounting hardware
Description_FAB	Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
Description_INV	57840EP
Description_MKT	ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are fully rebuildable and re-tunable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Description_SHO	SHOCK ABSORBER PAIR
Description_TRA	ICON 2022-2023 Toyota Tundra, 0-1” Lift, 2.5 VS Rear Shocks w/CDEV, Pair, 57840EP
External Reservoir	Yes
Grade Type	Performance
height	9.0
length	39.0
LTL	N
Shaft Diameter	0.875
Shaft Material	Chrome
Title	ICON 22-23 Toyota Tundra, 0-1” Lift, 2.5 VS Rear Shocks w/CDEV, Pair
Title	ICON 22-23 Tundra 0-1.5”/23 Sequoia 0-3" Lift, 2.5 VS Rear Shocks w/CDEV, Pair
weight	32.0
width	15.0