![Must-have Holybro Pixhawk Kakute 722 Autopilot Flight Controller With Tekko 32 F4 50a Esc Stack (20263) Shop Now [D5CzatNZ]](https://cdn.shopify.com/s/files/1/2497/6294/files/Holybro20263_1.webp?v=1736105701)
![Must-have Holybro Pixhawk Kakute 722 Autopilot Flight Controller With Tekko 32 F4 50a Esc Stack (20263) Shop Now [D5CzatNZ]](https://cdn.shopify.com/s/files/1/2497/6294/files/Holybro20263_2.webp?v=1736105701)
![Must-have Holybro Pixhawk Kakute 722 Autopilot Flight Controller With Tekko 32 F4 50a Esc Stack (20263) Shop Now [D5CzatNZ]](https://cdn.shopify.com/s/files/1/2497/6294/files/Holybro_20263_3.webp?v=1736105742)
Must-have Holybro Pixhawk Kakute 722 Autopilot Flight Controller With Tekko 32 F4 50a Esc Stack (20263) Shop Now [D5CzatNZ]
Must-have Holybro Pixhawk Kakute 722 Autopilot Flight Controller With Tekko 32 F4 50a Esc Stack (20263) Shop Now [D5CzatNZ]This Holybro stack consists of a Kakute F722 flight controller and a Tekko32 F4 50A 4in1 ESC.Compatible with both digital and analog VTX, the Kakute F722 Tek
Secure Shopping
100% Safe Guarantee
Free Shipping
On orders over $30
Money-Back
30-Day Guarantee
Must-have Holybro Pixhawk Kakute 722 Autopilot Flight Controller With Tekko 32 F4 50a Esc Stack (20263) Shop Now [D5CzatNZ]
Must-have Holybro Pixhawk Kakute 722 Autopilot Flight Controller With Tekko 32 F4 50a Esc Stack (20263) Shop Now [D5CzatNZ]
This Holybro stack consists of a Kakute F722 flight controller and a Tekko32 F4 50A 4in1 ESC.
Compatible with both digital and analog VTX, the Kakute F722 Tekko32 F4 50A has an ICM42688P gyro, built-in OSD, 16MB blackbox, LED port and can support up to 8S voltage while providing a stable output of 9V/3A and 5V/2A.
Overview
- High-performance STM32 F722 MCU with speeds up to 216MHz.
- ICM42688P gyroscope, independent low-noise power supply.
- Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port.
- Built-in analog video OSD, 16 Mbytes black box,
- High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output.
Specification:
- MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash
- IMU: ICM42688-P (SPI)
- Barometer: BMP280
- OSD: AT7456E
- 5x hardware UARTS (UART1,2,3,4,6)
- 7x PWM Outputs (6 Motor Output, 1 LED)
- Onboard 16 Mbytes for Blackbox logging
- Battery input voltage: 3S - 8S
- BEC: 9V/3A, 5V/2A, 3.3V/0.2A
-
Connector
- 2x JST-SH 8pin port for ESC
- 1x JST-SH 6pin port for HD VTX
- 2x JST-SH 4pin port for Receiver & Analog Camera
- 1x JST-SH 3pin port for LED
- USB Type -C
- Dimensions: 35x35mm
- Mounting Holes: Standard 5 x 30.5
- Weight: 8g
Firmware Targets
- Betaflight Target: KAKUTEF7MINIV3
- INAV Target: KAKUTEF7MINIV3
ESC
Tekko32 F4 4in1 50A ESC(AM32)
Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / AM32 / 30x30
Features:
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16k to 96k
- Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
- 1x Kakute F722
- 1x Tekko32 F4 4-in-1 50A ESC
- 1x Electrolytic capacito: 1000uF 35v
- 1x 8pin to 8pin 1mm pitch 65mm cable
- 1x 8pin to 8pin 1mm pitch 25mm cable
- 1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
- 1x JST SH 6pin 100mm cable (for Caddx HD Systems)
What Our Customers Say
Absolutely no complaints!
An excellent buy. I have no regrets.
- Angie P..
Absolutely no complaints!
Does a remarkably good job.
- Delilah Z..
Absolutely no complaints!
This is a really nice tool.
- Latoya P..
![NX7-F-IND-330_on 8,7W 80_4000K 65° Black PUSH [L1A0.84000765.BL.XX4]](https://cdn.shopify.com/s/files/1/0710/2454/1719/files/nixeven-full-surf_-ind-330mm-web-image001_32b9aeb4-97d9-4386-8707-45e26f209c76.jpg?v=1730334373)
