Cyber Week Deal Vr6 Short Runner Intake Manifold Next Gen [sYGXAQiL]

Our High Flow Short Runner Intake Manifold should be on the shopping list for any high-power VR6 project car.

Starting at the head we utilize a Billet Machined Flange that has machined Oring grooves for the best seal possible, going up from the Head Flange we use 1.5" aluminum runners to connect to the Billet Machined Plenum Flange that has built in velocity stacks.

For the plenum we utilize .125" 5052 Aluminum.

The Intake manifold comes standard with a Billet 75MM throttle body flange and 1 Oring Gasket.

Due to the tight fitment of a Short Runner Intake Manifold we place a 3/8" npt Bung on the bottom side of the manifold for vacuum referencing.

(From testing we do believe it is possible to use a Factory location Battery with slight trimming to the OE tray)

What you will receive

• Short Runner Intake Manifold
• 6 Orings for the Head Flange Mating surface
• 1 Orings for the Throttle Body Mating surface 
• Necessary Hardware for Mounting