Essential New Product! 1/14 Rc Hydraulic Excavator 110w 9ch Valve Remote Control 3arms Metal Digger Model Pl18ev Radio Gadget [13TxY8t2]

#Specification:
Scale: 1/14
Item Condition: New, Painted and Assembled
Material: Metal, Plastic 
Valve: Metal, 7+2CH
Net Weight: About 6.5KG
ID: HTM-J110W-RTR-Y

#The Package Includes:
1/14 RC Hydraulic Excavator Model
ESC
Motor
Servo
Light System
Hydraulic System with 7 +2 channels Reversing Valve
Manual Quick Release Coupler
Rotating Warning Lights
FlySky PL18EV  Remote Controller and 2PCS Receiver
Battery

#The Package Does Not Include:
Sound System
Charger
Hydraulic Oil

#Feature: 
1. The hydraulic pump is equipped with a pressure-adjustable relief valve. The integrated hydraulic-electric circuit loop and enhanced bearing positioning effectively reduce the likelihood of oil seepage.
2. The upper chassis features a 7-way directional control valve, while the lower chassis is equipped with a 2-way directional control valve with neutral position return. The upper chassis has 2 auxiliary hydraulic circuits and one backup electrical circuit, and the lower chassis provides an additional auxiliary hydraulic circuit.
3. Both the front and rear wheels are steerable, offering 4 distinct steering modes for operational flexibility: front wheel only steering, front and rear wheel synchronous steering, front and rear wheel counter steering, and rear wheel only steering.
4. The system integrates multi-functional warning lights, turn signals, reverse/brake lights, a rotating beacon, and a reverse buzzer. Note: The sound module is not included.
5. You can use the remote control to maneuver the boom left and right while the chassis and console stay stationary.
6. Comes with a manual quick-release coupler and a hydraulic blade.
7. The control system includes a Flysky Paladin PL18EV transmitter and dual FGR12B receivers.
8. Powered by a 3S 2200mAh Li-Po battery (dimensions: 78×34×26mm), it provides about 25 minutes of continuous operation.

Pay Attention!
1. Hydraulic pressure recommendation: Maintain system pressure within 3MPa parameters. As the pump employs a unidirectional ESC, ensure the transmitter's hydraulic control knob remains fully counterclockwise (left limit position) during system initialization.

2. Post-delivery commissioning procedure:
a) Replace the standard tank screw with the ventilated fastener using provided gasket
b) Manually extract axle nuts from all four wheels
c) Remove tires and install mudguards in designated positions

3. Installation requirements:
a) Secure mid-arm auxiliary lights using provided fasteners
b) Mount left-side integrated handle-mirror assembly and right-side mirror unit to cab structure with specified hardware

#If you have any questions or are not sure whether it is the correct item you want, pls feel free to contact me before purchasing.