Internet Famous Sansui 3300 Am Fm Vintage Stereo Receiver Wood Case (1973) (as Is) Diy Kit [7M2wkYUy]

The Sansui 3300 is a beautiful machine. Housed in a bright wooden case with a silver and black from panel, the 3300 is a vintage AM/FM stereo receiver built back in the early 70s. It's capable of a modest 28 watts into 8 ohms and has not one but two phono hookups so you can connect a couple of turntables to it. This particular system currently has no right channel and no tuner, but for the right person who wants to give this amazing system the service and care it needs, it can become the perfect vintage receiver!

CONDITION

As is, has issues, for parts or repair.

At Spencertified, we are experts on a wide variety of electronics. Unfortunately, we do not have the time or resources necessary to fix everything that comes in our shop. So, rather than throwing it away, we give our customers an opportunity to tinker.

Cosmetic Condition: Good.

Functional Condition: As-is. Has issues. For parts or repair. (No tuner, no right channel).

Technician notes: We do not have notes because we have not done a thorough inspection.

WHAT'S IN THE BOX?

• Internet Famous Sansui 3300 Am Fm Vintage Stereo Receiver Wood Case (1973) (as Is) Diy Kit [7M2wkYUy]

Other information about the Sansui 3300

• Tuning range: FM, MW
• Power output: 28 watts per channel into 8Ω (stereo)
• Frequency response: 20Hz to 40kHz
• Total harmonic distortion: 0.4%
• Damping factor: 30
• Input sensitivity: 4mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
• Signal to noise ratio: 70dB (MM), 80dB (line)
• Output: 150mV (line), 30mV (DIN), 0.8V (Pre out)
• Speaker load impedance: 4Ω to 16Ω
• Semiconductors: 58 x transistors, 3 x FET, 20 x diodes, 2 x zener diodes, 1 x IC
• Independent bass, treble, and balance control

DIMENSIONS

• 19.16" x 14" x 5.8" (Length x Width x Height)
• Weight: 37.2 lbs

INPUTS

• Tape Monitor x1 (front)
• Microphone x1 (front)
• FM Antenna x1 (back)
• AM Antenna x1 (back)
• Phono R/L x2 (back)
• Aux L/R x1 (back)
• GND x2 (back)
• Tape Rec/Play x1 (back)
• Noise Reduction Adaptor R/L x2 (back)
• 4 Channel Adaptor R/L x1 (back)
• Tape L/R x2 (back)
• Main In L/R x1 (back)

OUTPUTS

• Tape Monitor x1 (front)
• Speakers Off x1 (front)
• Tape Rec/Play x1 (back)
• Noise Reduction Adaptor R/L x2 (back)
• 4 Channel Adaptor R/L x1 (back)
• Tape L/R x2 (back)
• Pre Out L/R x1 (back)
• Speakers R/L x3 (back)
• AC Outlets x2 (back)

MANUFACTURE DATE and PLACE

• MFD. 1973
• Made in Japan