SEQ-8: Power Sequencer (8-step)

8-step power sequencer works with low voltage remote power controls and switches to provide time-delayed activation and deactivation of AC powered equipment on site or in a remote location.

FEATURES

• Eight delayed closure circuits activate in sequential order and deactivate in reverse order. Sequencing is initiated by a single remotely located SPST maintained contact closure switch or multiple SPST normally open momentary closure switches (order separately).
• Chassis:  10.00 in. x 3.281 in. x 1.687 in.
• LED status indicators
• Slide switch allows selection of single or multiple switch modes.
• Adjustable delay allows 0.5 to 10 seconds between steps.
• Includes auxiliary 24VDC, 300mA (max) output for remote indicators
• UL Listed power supply with input 100-240VAC, output 24VDC, 500mA, 6 ft. cord and four plug adaptors (NEMA 1-15, Schuko CEE 7/16, BS1362, AS3112)

COMPLIANCE & CERTIFICATION

• Made in U.S.A. with global components

A&E SPECIFICATIONS

• The device for sequentially activating equipment connected to remote power controls shall be Lowell Model No. SEQ-8, which shall feature barrier strip terminals for connection to remote power control Model No. RPC- ________. Contacts shall also be available for connecting remote switches (required) for activation. [ Applications with multiple switch actuation shall use momentary wall switch Model No. _____ or momentary rack panel switch Model No. ______. Applications with single switch actuation shall use maintained wall switch Model No. ___ or maintained rack panel switch Model No. _____. ]