LER-4427-BAV: Rack with accessories

Stand-alone rack with enclosed sides and adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions. This model includes an accessory bundle (not installed).

SPECIFICATIONS (for LER-4427 rack)

• Rack Space:  44U

• Rack Height:  83.125 in.

• Rack Width:  23.06 in.

• Rack Depth:  27.00 in.

• Useable Depth:  24.34 in.

ACCESSORY BUNDLE

• Surface-mount solid steel front door with keyed lock extends one inch from frame. Mounts left or right, field changeable.

• One pair 44U adj. rear rails, tapped 10-32

• Power strip with 24 outlets (sixteen 15A, eight 20A), transient voltage surge suppression, LED indicator, circuit breaker, 12 ft. attached cord, NEMA 5-20P plug.

• One (1) fan panel with four (4) 4.7 inch diameter whisper fans.

• Four (4) slotted cable managers, horizontal mount (straight)

• Two (2) slotted cable managers, horizontal mount (4 in. offset)

• One (1) vertical cable manager

• Set of heavy-duty leg levelers.

• Magnetic vent blocker kit

• Velcro cable wraps (pack of 12)

• Extra rack screws

A&E SPECIFICATIONS

The E.I.A. compliant rack shall be Lowell Model No. LER-4427-BAV, which shall measure 83.125"H x 27.00”D x 23.06"W, with racking space of 44 rack units. The EIA/TIA compliant rack shall be UL Listed under Standard 2416. It shall be 16 gauge welded U.S. steel with 14-gauge base reinforced at all load-bearing junctures. It shall feature compound knockouts on top for conduit size 2"-1" and 1.5"-1" and have 0.5" knockouts for BNC wireless antennas. Rack finish shall be black wrinkle powder epoxy. The rack shall feature welded side panels with top/bottom vents, recessed rear door with top/bottom vents and keyed lock, grounding stud, 7U top opening with riveted rails tapped 10-32, two black steel closure panels for top, and a pair of adjustable front mounting rails tapped 10-32.
The rack shall include the following accessory bundle—solid steel surface mount front door with keyed lock, pair of 44U rear rails tapped 10-32, 7U x 19"W fan panel with four 4.7" dia. whisper fans, one corded power strip with sixteen 15A outlets and eight 20A outlets, four horizontal-mount cable management bars (straight), two horizontal-mount cable management bars (4" offset), one vertical cable manager, four leg levelers, a pack of velcro cable wraps, a magnetic vent blocker kit, and two extra bags of Pilot Point rack screws (25 screws per bag).