Name: The Perfect Seco-larm E-941da-1k2q 1,200-lb Electromagnetic Lock, Double-door, Ul Listed, Pack Of 2 Limited Time 80% Off [JYRV5gMt]
Brand: mappa-mercia.org
SKU: HBS11024696826
Price: 58.99 USD
Availability: InStock
Rating: 3.9 (640 reviews)

The E-941Dx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.

1,200-lb (545kg) Holding force per door
No residual magnetism
MOV Surge protection
Built-in status LED shows locked/unlocked status
Built-in bond sensors with 3A@12VDC dry relay output for monitoring door status
Anodized aluminum housing (US 28)
Adjustable mounting bracket
Complete mounting hardware for typical installations
Additional brackets available for easy mounting or atypical situations
Detachable faceplate for easy access to wiring
12/24VDC Selectable
Multiple UL listings
- - - UL294 Access Control System Units – USA
    - UL10C Positive Pressure Fire Test – USA
    - UL10B Fire Test of Door Assemblies – USA
    - ULC-S104 Fire Test of Door Assemblies – Canada
Lifetime limited warranty*

*Warranty applies in the USA and Canada only. Contact SECOLARM for details.

Specifications

Holding force	1200-lb (545kg) per door
Operating voltage	12 /24 VDC (selectable)
Current draw	500mA@12VDC per door (1A total) 270mA@24VDC per door (540mA total)
Operating temperature	32º~120º F (0º~49º C)
Electromagnet dimensions	21″ x 2-5/8″ x 1-5/8″ (536x67x42 mm)
Armature dimensions	7-1/4″x2-3/8″x5/8″(185x61x16 mm)
Weight	21-lb (10kg)
Destructive attack	Level I
Line security	Level I
Standby power	Level I
Endurance	Level IV

Troubleshooting

Doors lock, but can easily be forced open	Make sure the electromagnet and armature plates are properly aligned. Make sure the contact surfaces of the electromagnet and armature plates are clean and free from rust. Check the power leads with a meter, and make sure 12VDC or 24VDC is present. Make sure the rubber washer is installed and free from damage.
Delay in door releasing	The electromagnet is fitted with a metal oxide varistor to prevent interference, so do not install a second diode. Ensure that the control device is connected between the power source and the positive terminal of the lock