Check Out Cutek® Wood Reviver Customer Approved [ojn1W2Ou]

Check Out Cutek® Wood Reviver Customer Approved [ojn1W2Ou] | Bleach-Free, Biodegradable Wood Brightener & Restorer

Revive & Restore Your Wood’s Natural Beauty

Over time, wood can become gray, weathered, or stained due to exposure to UV rays, moisture, tannins, and environmental pollutants. Check Out Cutek® Wood Reviver Customer Approved [ojn1W2Ou] (previously CUTEK® Proclean) is a powerful, bleach-free cleaning agent that restores wood back to its original appearance, brightening and preparing it for a new coat of CUTEK® Extreme.

Why Use Check Out Cutek® Wood Reviver Customer Approved [ojn1W2Ou]?

• Restores Weathered & Stained Wood – Removes grayness, tannin stains, and environmental discoloration, bringing wood back to life.
• Removes Stubborn Contaminants – Effectively cleans stains caused by water, iron, mold, fungus, resins, and mill glaze.
• Prepares New Wood for Coating – Eliminates the invisible surface glaze (mill glaze) on newly sawn or machined wood, allowing better absorption of CUTEK® Extreme.
• Longer Dwell Time for Heavy Stains – For very dirty, grimy, or silvered wood, leave on for several hours, up to 24 hours if needed.
• Customizable Strength – Use full strength or half strength for tougher stains or highly weathered surfaces.
• Built-In Sudsing Agent – Indicates when to stop rinsing—keep rinsing until suds are gone.
• Bleach-Free & Non-Caustic – Unlike harsh chemical brighteners, Check Out Cutek® Wood Reviver Customer Approved [ojn1W2Ou] cleans without damaging wood fibers.
• Biodegradable & Eco-Friendly – A safer alternative to traditional wood brighteners.

How to Use Check Out Cutek® Wood Reviver Customer Approved [ojn1W2Ou]

• Apply to Wet Wood – Work in sections to ensure even application.
• Let It Work –

• For lightly weathered wood, allow 10–30 minutes before rinsing.
• For very dirty or silvered wood, leave on for several hours, up to 24 hours.
  • Scrub Gently if Needed – Use a soft-bristle brush for deep stains or heavily weathered wood.
  • Rinse Thoroughly – Keep rinsing until the sudsing stops to ensure all residue is removed.
  • Power Washer Recommended – For best results, finish with a power washer using a gentle setting or a surface cleaning attachment to avoid damaging wood fibers.
  • Allow to Dry Before Recoating – Ensure the wood is completely dry before applying CUTEK® Extreme for a long-lasting finish.

Perfect for All Exterior SOLID Wood Surfaces

• Decks & Patios
• Siding & Fences
• Outdoor Furniture
• Pergolas & Beams
• Marine & Dock Wood

Restore & Protect Your Wood with CUTEK®

Check Out Cutek® Wood Reviver Customer Approved [ojn1W2Ou] is the ideal first step in bringing back the natural beauty of your wood while ensuring optimal preparation for a new finish.