Trending Performer-plus Camshaft Kit For Chevy 200-229 90deg V6 Tool [1kTwlqpc]

Edelbrock Performer-Plus Camshaft Kit for Chevy 200-229 90 Deg V6 (Part #2112).

Edelbrock Performer-Plus Camshaft #2112 is designed for 200-229 Chevy 90 Degree V6 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2112 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For non-computer controlled vehicles and non-roller applications. 

Installation Notes:

• Recommended Valve Springs for OEM heads: Edelbrock part #5813 non-rotator/# 5913 Rotator
• In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs.
• Oil/additive must contain Zinc designed for use with flat tappet camshafts.
• Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.
• Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.

Specs:

• Series: Performer-Plus
  
• Grade Type: Performance
  
• Lifter Materials: Hardened Steel
  
• Computer Controlled Compatible: No
• Lifter Type: Hydraulic
• Intake duration: 204 Degrees
• Exhaust duration: 214 Degrees
• Intake lift: .420"
• Exhaust lift: .443"
• Lobe separation: 112 Degree
• Intake Center Line: 107 Degree
• Vacuum: 16"

You can view and download the complete assembly instruction booklet here.