Travel Ready Winnebago Revel Table Adapter [limited Qty] [i9x05S2y]

The made in the USA Travel Ready Winnebago Revel Table Adapter [limited Qty] [i9x05S2y] enables the stock exterior folding table to be used without the support leg.  

The 500 adapter is designed with a .520" slot width to accept tables with a thickness between .500"-.519".  This adapter is the primary size for majority of Revel tables.

The 480 adapter is designed with a .480" slot width to accept tables with a thickness between .450"-.479".  

If you are unsure of what table adapter to order please email us with your table thickness and we'll be happy to help!

This adapter set is ideal for drinks, cards, cameras, etc. however it is not designed to support more than 7-10 pounds and weight should be distributed evenly.

Each table adapter includes a CNC machined 6061 aluminum mount, pre-crimped wire attached to the L-track d-ring clip, 6" black L-track, screws to mount L-track and 2 set screws.  Aluminum adapter is black anodized aluminum.

L-track will need to be mounted to the Revel and the table adapter will need to be screwed into the table.  L-track allows for adjustability of the table so that it can be adjusted depending on terrain.  Wire will be pre-measured and attached so no crimping will be needed to install.  Simply clip the d-ring clip into the L-track.

Only tools needed for install will be drill, phillips head screwdriver and small hex key.

• What’s included:
  • #8 x ½ inch flat head Phillips screws
    • Quantity: 2
  • #10 x ½ inch flat head Phillips screws (These are the bigger flat head screws)
    • Quantity: 2
  • 10/32 NF x 3/16 inch set screws
    • Quantity: 2
  • CNC machined table adapter
    • Quantity: 1
  • L-track
    • Quantity: 1
  • D-ring clip with crimped wire
    • Quantity: 1
  • Detailed instructions

Table adapters are assembled to order so please allow 3-5 days for shipping.