Multi-purpose Qj216ma Skf Four Point Contact Ball Bearing 80x140x26mm Series [6BDxbMy8]

SKF Four point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads in both directions. For a given axial load, a limited radial load can also be supported (Load ratio). The bearings are separable, i.e. the outer ring with ball and cage assembly can be mounted separately from the two inner ring halves.

Both inner ring halves of SKF Explorer four-point contact ball bearings have a recessed shoulder. This improves oil flow when the bearing is used in combination with an SKF cylindrical roller bearing (fig. 1). In addition, these recesses can be used to facilitate dismounting.

Four-point contact ball bearings can accommodate high axial loads in both directions and small radial loads. They can operate at very high speeds and are more suitable than deep groove ball bearings for supporting large axial forces. The outer ring, with ball and cage assembly, can be mounted separately from the two inner ring halves.
High-speed capability
Accommodate high axial loads in both directions and small radial loads
Require considerably less axial space than double row angular contact ball bearings

Dimensions
Bore diameter 80 mm
Outside diameter 140 mm
Width 26 mm
Contact angle 35 degree

Performance
Basic dynamic load rating 146 kN
Basic static load rating 156 kN
Limiting speed 8 000 r/min
SKF performance class SKF Explorer

Properties
Contact type Four-point contact
Number of rows 1
Locating feature, bearing outer ring None
Ring type Two-piece inner ring and one-piece outer ring
Cage Machined metal
Matched arrangement No
Universal matching bearing No
Axial internal clearance CN
Material, bearing Bearing steel
Coating Without
Sealing Without
Lubricant None
Relubrication feature Without