Special Edition 7316becbp Skf Single Row Angular Contact Bearing 80x170x39mm Complete Set [GMh8erFZ]

These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

High-speed capability
Accommodate relatively high radial loads and large unilateral axial loads

Dimensions
d 80 mm Bore diameter
D 170 mm Outside diameter
B 39 mm Width
d1 115.2 mm Shoulder diameter of inner ring (large side face)
d2 97.07 mm Shoulder diameter of inner ring (small side face)
D1 136.75 mm Shoulder diameter of outer ring (large side face)
a 72 mm Distance side face to pressure point
r1,2 min.2.1 mm Chamfer dimension
r3,4 min.1.1 mm Chamfer dimension

Abutment dimensions
da min.92 mm Diameter of shaft abutment
Da max.158 mm Abutment diameter housing
Db max.163 mm Diameter of housing abutment
ra max.2 mm Radius of fillet
rb max.1 mm Radius of fillet

Calculation data
Basic dynamic load rating C 143 kN
Basic static load rating C0 118 kN
Fatigue load limit Pu 4.5 kN
Reference speed 5 000 r/min
Limiting speed 5 000 r/min
Minimum axial load factor A 0.216
Minimum radial load factor kr 0.1
Limiting value e 1.14

SINGLE BEARING OR BEARING PAIR ARRANGED IN TANDEM
Calculation factor (single, tandem) X 0.35
Calculation factor (single, tandem) Y0 0.26
Calculation factor (single, tandem) Y2 0.57

BEARING PAIR ARRANGED BACK-TO-BACK OR FACE-TO-FACE
Calculation factor (back-to-back, face-to-face) X 0.57
Calculation factor (back-to-back, face-to-face) Y0 0.52
Calculation factor (back-to-back, face-to-face) Y1 0.55
Calculation factor (back-to-back, face-to-face) Y2 0.93

Mass
Mass 3.8 kg