Crowd Pleaser 18500065 Service Kit (with Side Jaw Pincers & Hand Clamp Cutters) Black Friday Exclusive [3D2RusWI]

2-Ear version: extended clamping range

Compact one-piece clamp: for robust, secure connections

Clamp ear: fast and simple installation, visible deformation provides evidence of proper closure

Deburred edges: reduced risk of damage to parts being clamped

Stainless Steel, Material no. 1.4307/UNS S30403

Included in the Kit:

15 of 9 mm Clamp, Part No. 15100004
15 of 11 mm Clamp, Part No. 15100023
15 of 13 mm Clamp, Part No. 15100006
15 of 15 mm Clamp, Part No. 15100007
15 of 18 mm Clamp, Part No. 15100009
12 of 20 mm Clamp, Part No. 15100010
12 of 23 mm Clamp, Part No. 15100012
12 of 25 mm Clamp, Part No. 15100013
12 of 27 mm Clamp, Part No. 15100014
HIP 2800 E Compound Action Side Jaw Pincer, Part No. 14100387
Hand Clamp Cutter, Part No. 14100407

Genuine Oetiker 2-Ear Clamps

The ears of these clamps do not have a dimple and nearly double the clamping range, compared to the 1-ear clamp. 2 ears provide a degree of elasticity to accommodate changes in size of the parts being joined, such as that which may be caused by thermal expansion or vibration.

Clamp diameter

The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp.

How to Install

These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily.

Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386

Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387

Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396

How to Remove

Ear clamps can be easily removed using Oetiker’s hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps.

Oetiker Hand Clamp Cutter, Item No. 14100407

Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications.