Fast Shipping 16026 Ntn Open Deep Groove Ball Bearing 130x200x22mm Perfect Gift [SAiMnGUL]

Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

d - Internal diameter 130 mm
D - External diameter 200 mm
B - Bearing/Inner ring width 22 mm
rs - Min fillet radius 1,1 mm
Radial clearance class C3
Mass 2,31 kg

PRODUCT PERFORMANCE
C - Dynamic load 88,5 kN
C0 - Static load 79,5 kN
Cu - Fatigue limit load 4,25 kN
f0 - Coefficient 16.2
Nlim - Oil lubrication limit speed 3800 tr/min
Nlim - Grease lubrication limit speed 3200 tr/min
Tmin - Min operating temperature -40 C
Tmax - Max operating temperature 120 C

ABUTMENT
da min - Min shoulder diameter IR 136,5 mm
Da max - Max shoulder diameter OR 193,5 mm
ra max - Max shaft & housing fillet radius 1 mm

NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.