✨ Get 20% OFF your first order. ✨

Your Shopping Bag

Your bag is empty

Subtotal $0.00
Shipping Calculated at checkout
Continue Shopping

High-quality Chimney Saver Crown-coat Brushable Sealant Collection [DIXEBie7]

$40.99 $131.99 -69%

Because of its unique quick drying water base technology and its easy brush on application, Crown-Coat Brushable Sealant has become a favorite among chimney professionals. Like Crown-Seal, Crown-Coat is premixed and can be used wherever a long lastin

Secure Shopping

100% Safe Guarantee

Free Shipping

On orders over $30

Money-Back

30-Day Guarantee

Because of its unique quick drying water base technology and its easy brush on application, Crown-Coat Brushable Sealant has become a favorite among chimney professionals. Like Crown-Seal, Crown-Coat is premixed and can be used wherever a long lasting waterproof membrane is needed. Fill larger cracks and voids with patching cement or high quality caulk, then apply two coats of Crown-Coat. When applying to a "new" crown allow the crown 48 hrs. cure time before applying the crown saver. This will cover approximately 40 sq. ft. per gal.

CrownCoat Product Brochure

Instructions for Use

The surface and air temperature should be above 45 degrees Fahrenheit for proper application. Make sure to not apply if the temperature is expected to dip below 45 degrees Fahrenheit for a period of 4 hours after sealer is applied. Do not apply on wet or saturated surfaces. Make sure that it does not rain for 4 hours after it is applied unless it's protected by a polyethylene film. Store unused product in an air tight container above 32 degrees Fahrenheit.

Application

The surface to be coated must be structurally sound, not loose, and the surface must be clean and dry. Brush the surface with a wire or poly brush to remove any loose material. If the surface has larger cracks, you can fill them with 100% silicone caulk. Before applying Crown Coat, lightly mist the top of the crown with clean water. Make sure not to flood the crown. Misting will help Crown Coat penetrate the crown creating a strong bond. Use a 3 to 4 inch synthetic bristle paint brush. Brush a thin coat over the entire crown, working Crown Coat into the crown like painting a wall. Once you have applied the first coat you will have to wait a few minutes before applying a second coat, so that the first coat will form a tacky film. To finish, brush a second heavier coat. For a clean finish, wrap duck tape around the brick sides of the chimney and the flue. Crown Coat can be stored for 18 month shelf life.

What Our Customers Say

January 1, 2026

Absolutely no complaints!

This is a very nice gadget.

- Tiffani C..

January 1, 2026

Absolutely no complaints!

A very impressive piece of kit.

- Amara Z..

January 1, 2026

Absolutely no complaints!

Very happy with this item. Thank you.

- Jennifer Y..

Write a Review

You Might Also Like

Discover more great products from our collection.

McGill End Table

McGill End Table

(19)
$59.99 $191.99 -69%
XJT SH08-3226A

XJT SH08-3226A

(442)
$55.99 $179.99 -69%
Red love jumper

Red love jumper

(210)
$20.99 $67.99 -69%
Pannello solare Hefei 500W

Pannello solare Hefei 500W

(427)
$37.99 $121.99 -69%

Copyright 2026 © mappa-mercia.org

VISA
PayPal
Stripe
Mastercard
CASH ON DELIVERY