Value Buy Black Eagle Renegade Fletched Arrows - 6 Pack Solution [vjPF70Cr]

The Renegade was designed specially for hunters that want a supremely accurate small diameter carbon arrow that is tough as nails - at a great price. This shaft was designed to eliminate cross-wind drift. It’s perfect for those long range shots. The flight characteristics of this extremely durable shaft ensures maximum power down-range.

• Black Eagle Arrows "R" Nock 10 -Orange- Grains
• Stainless Steel Bone Crushing Half-Outs - 56 Grains
• Bohning Blazer Vanes | Orange, Yellow - 21 Grains
• Shipped in Renegade Box

1. Square the end of the arrow shaft
2. Dry fitting is recommended on all components. Slide half-out in shaft and spin test (if you prefer)
3. If a slight wobble is noticed, DON'T PANIC! Rotate the half-out with field point installed until the spin is true.
4. Again, Rotate Half-Out until it spins perfect.
5. Use a Silver or Black Sharpie and mark the Shaft and the Half-Out for perfect alignment once glue is applied.
6. We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
7. Apply a even amount of glue around the shaft of the Half-Out to ensure the glue channels get enough glue in them to hold.
8. Once the glued half-out is finished stand the arrow on the point to dry.

Marked for a perfect Spin Step#5

Not sure what size is right for you. Check out our sizing chart.

Hot Melt is NOT recommended for use with Black Eagle Arrow shafts.