Jaw-dropping Plastic Glow In The Dark Impala Antelope Horns Slash 65% Off The Price [ATOPWlUH]

Sold in a set of 2, so the price you pay is for a full set.
Sizes:
14" Tall
6.75" base circumference

These are opaque horns filled with a rigid expanding foam for extra durability.

These come ready to be mounted on a head by either drilling holes in the bottom and sewing, or gluing them down directly, or any of the other commonly used methods of horn attachment. (Strong magnets, screws/bolts/etc)

Replicas of real horns, these weigh only a few ounces; much lighter than the real thing! However since they are made from natural horns, there can be differences in size/symmetry/details.

Each set can very on weight since they are hand slushed, but most sets will be about the same. While these are very durable, if enough pressure is applied they can break. Heat can also cause warping.

Due to the ridges naturally occurring, the resin could bubble around the ridges. We do try to avoid this, and it isn't super noticeable, but we just want to throw it out there that it could happen.

Glow in the dark horns will glow in the dark once properly charged under a bright light. By "charged" we mean you let them sit under the bright light for an extended period of time. The best light is either direct sunlight, or a UV light.

Glow times:
Green: 12+ hours
Blue: 6 Hours
Aqua: 10 Hours
White: 6 Hours
Dark Blue: 3 hours
Orange: 1 Hour

SOLID: These are opaque horns filled with a rigid expanding foam for extra durability.

Stained horns will come with a brown paint wash on them, sealed with clear spray.

In order to purchase the 'installed' options you must also purchase a resin blank at the time of buying. These horns will come with installed wood nuts in the base of the horn, and the hardware required (Bolts/washers) to attach them to a resin blank. The blank will come with holes drilled where the horns are to be installed. These will make the antlers removeable for storage and travel.

Stained horns will come with a brown paint wash on them, sealed with clear spray.

In order to purchase the 'installed' options you must also purchase a resin blank at the time of buying. These horns will come with installed wood nuts in the base of the horn, and the hardware required (Bolts/washers) to attach them to a resin blank. The blank will come with holes drilled where the horns are to be installed. These will make the antlers removeable for storage and travel.

HOLLOW: Are still opaque, just do not come with the rigid foam in the center. These horns are more liable to break around the edges during transport; please keep this in mind! (Keeping them hollow does not make them lighter, since we have to make them thicker to resist breakage.)