Multi-purpose Memphis Mxabmb2bt Clamp Mount 2 Speaker System W/ Bluetooth - Black Series [Tfc9QY2J]

Memphis MXABMB2BT Clamp Mount 2 Speaker System W/ Bluetooth - Black

This Bluetooth-equipped speaker/amp combo from Memphis Audio will bring serious sound to your boat, motorcycle, UTV, or ATV. With a powerful 2-channel amp, a pair of rugged 3" speakers, and a Bluetooth controller, you can crank and control your tunes on land or sea, in wet or dry conditions. This all-weather system is easy to mount and will look terrific on your vehicle.

Powerful performance

These speakers are small in size, but they're tough enough for the outdoors and tuned to perform. Each speaker has a stout 15 oz. magnet, so in addition to thrilling highs, you'll hear a lot more bottom end than you'd expect. The compact marine amp will produce 15 watts RMS (50 peak) per channel, so your speakers won't lack the juice they need to perform at their best.

This kit also includes an MXABTR Bluetooth controller, so you can enjoy wireless control from your cell phone or through the controller's interface.

Product highlights:

• system includes 2-channel amplifier, controller, and two 3" speakers
• includes clamp-style bar mounts, post mounts, and water-resistant wiring harness
• marine-grade construction for weather resistance
• Bluetooth enabled with controller included
• 2-channel amplifier (15 watts RMS per channel at 4 ohms, 25 watts RMS at 2 ohms, 50 watts peak)
• available in Matte Black or Chrome
• MFR # MXABMB2BT

What's in the box:

• 2 (Black) Bullet-style speakers (attached bracket and 90" speaker wire)
• Amplifier (attached 3" wire harnesses and 18" audio input cable)
• MXABTR Bluetooth controller (attached 22" cable)
• Bluetooth module (attached 4.5" controller cable / 7" wire harness and RCA outputs)
• 2 Large bar-mount brackets (black)
• 2 Small bar-mount brackets (black)
• 22" Power/ground/remote/speaker output harness (inline 7.5A mini-fuse)
• 7" Stereo 3.5mm to dual RCA cable
• Bluetooth controller mounting cup
• Bluetooth controller mounting clamp
• Bluetooth controller mounting bracket
• Two M8 x 30mm bolts
• 2 Large flat-washers
• 2 Large lock-washers
• Two M8 nuts
• Two 3.5" rubber strips
• 4 Amp mounting tabs
• Four 15mm screws
• Four 6mm screws
• 4 Small flat-washers
• 4 Small lock-washers
• Two 1.5" adhesive pads
• Two 30mm threaded posts
• Two 5mm counter-sunk screws
• 2 Flange-nuts
• 2 Hex-nuts
• Speaker installation guide
• Bluetooth controller installation guide
• Warranty card