AiM Solo2 DL CAN/RS232 Wiring Harness

If you're moving your AiM Solo2 DL from one car to another and need a harness for power and data input, this is your cable. If you are putting a Solo2 DL into an older vehicle and need a power supply cable, use this and use only the "+" and "-" wires (fold back the CAN inputs).

The AiM V02569050 harness connects your Solo2 DL to your ECU via your vehicle's CAN or RS232 bus wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo2 DL, and the other has six non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).

Does not fit the original AiM Solo or Solo DL.

AiM Solo2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Details

• Manufacturer: AiM Sports
• Manufacturer part number: V02589050
• Fits Solo DL: No
• Fits Solo2 DL: Yes
• Fits Solo Base Model: No
• Fits Solo2 Base Model: No
• Pins on AiM Solo2 DL Side: 7 Pin Thread on connector
• Vehicle Chassis Ends: six non-terminated wires
• Chassis End Wiring Break Out: Red=+12 VDC, Black=Ground, Blue=ECU RS232TX, Blue=ECU RS232 CAN-, Gray ECU RS232 RX, Gray CAN+

AiM Solo2 DL CAN/RS232 Wiring Harness Wiring Code

• Red: +9 to +15 VDC
• Black: Ground
• Grey: CAN+
• Blue¹: CAN-
• Gray: ECU RS232 RX
• Blue¹: ECU RS232TX

¹ Note: both blue wires are the same color, but each wire has an identifier tag stating the connection type.