Name: Handcrafted Waterproof Outdoor Power Outlet With Remote Control - Uk Standard Plug Socket (model 0020780) Shop Now [4zwQaVhT]
Brand: mappa-mercia.org
SKU: HBS23985557856
Price: 22.99 USD
Availability: InStock
Rating: 4.19 (969 reviews)

Handcrafted Waterproof Outdoor Power Outlet With Remote Control - Uk Standard Plug Socket (model 0020780) Shop Now [4zwQaVhT]

Package Include:
1 X Wireless Switch: S1PX-UK-WP2-AC230 (with UK Standards Plug & Socket)
1 X Transmitter: CP-2
1 X Use manual

Introduction:
This is a wireless remote switch kit with British standards plug and IP66 waterproof socket. It including a S1PX-UK-WP2-AC230 wireless switch and a CP-2 transmitter. You can use it to easily convert an ordinary AC power outlet into a wireless remote control switch. It can be used for remote control of lights, pumps, fans, motors, heaters, electric solenoid valves, alarms, and other AC equipment.

Key Features:
Wireless control, easy to install.
Working Range: Up to 500m (15,00 ft) in open areas.
Waterproof: With IP65 waterproof case, waterproof connector and IP66 waterproof Socket
Universal input: Support 230V AC (220V~240V) used in Germany, UK, France, etc.
AC Power Output: It can control AC equipment with voltage AC 220V, 230V.
High Power: It can work at maximum current 13A.
3 Selectable Working Modes: Self-locking, Momentary, Interlocking.
Reliable Signal: RF signal can pass through walls, floors, doors, or windows, but it will lose some operating range.
Safety Features: Reverse voltage and overcurrent protection.
Interference: Two or more wireless switches may be used in the same area without interference.

Wireless Switch S1PX-UK-WP2-AC230 Parameters:

Parameters	Detail
Input / Output Type	AC220~240V (220V/230V)
Plug and Socket Standards	with British Standards Plug and Waterproof Socket
IP Rating of Plug and Socket	IP66
Cable Standard	three cores, 1.5 square millimeters
Load Capacity	13A / channel
3 Selectable Working Modes	Self-locking, Momentary, Interlocking
Suitable Wires for Connecting Terminals	22-12 AWG
Operating Temperature	-20 °C ~ +70 °C
Wireless Switch Case Size	100 x 68 x 50 mm (3.9 x 2.7 x 2.0 inches)
Socket Case Size	110 x 110 x 96 mm (4.3 x 4.3 x 3.8 inches)
Matching Transmitters	CWB-1(50m) / C-1(100m) / CP-1(500m) / CB-1(1km) for Self-locking / Momentary CWB-2(50m) / C-2(100m) / CP-2(500m) / CB-2(1km) for Interlocking

Transmitter CP-2 Parameters:

Parameters	Detail
Operating Voltage	12V (1 x 23A -12V battery, can be used for 12 months)
Operating Frequency	433.92 Mhz
Transmitting Distance	500m / 1500ft (theoretically)
Unit Size	85 x 36 x 16 mm (3.3 x 1.4 x 0.6 inches)

Setting different working modes:
The receiver will be set in Self-locking mode before leaving the factory, if you want to use another mode, please follow the following steps.

1) Setting Momentary mode: Press the wireless switch’s RF module learning button twice, signal LED flashes twice then goes off.
If you want to control an AC 230V exhaust fan with CP-1:
Hold button → Wireless switch output AC power (exhaust fan works)
Release → Wireless switch stop outputting (exhaust fan stops)

2) Setting Self-locking mode: Press the wireless switch’s RF module learning button 3 times, signal LED flashes 3 times then goes off.
If you want to control an AC 230V exhaust fan with CP-1:
Press once → Wireless switch output AC power (exhaust fan works)
Press again → Wireless switch stop outputting (exhaust fan stops)

3) Setting Interlocking mode: Press the wireless switch’s RF module learning button 4 times, signal LED flashes 4 times then goes off.
If you want to control an AC 230V exhaust fan with CP-2:
Press Button A → Wireless switch output AC power (exhaust fan works)
Press Button B → Wireless switch stop outputting (exhaust fan stops)