Your New Favorite Penguard Topcoat - Bs. 08e51 Limited Time 75% Off [G8oNd6hP]

Jotun Penguard Topcoat is a two-pack epoxy polyamide cured topcoat based on a polyamide cured epoxy resin. This product is a part of a complete system which is certified not to spread surface flames.

Penguard Topcoat bases are intermediates and need to be processed before use. As finishing coat in epoxy systems. Also on concrete where epoxy paints are specified.

This product is able to be tinted to RAL and British Standard colours.

Uses

• Recommended for topside, deck and superstructure
• Suitable for a wide range of industrial structures
• Recommended thinner: Jotun Thinner No. 17

Approvals and certificates

• Low flame spread certificate acording to IMO/Solas directive
• Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids

Application Methods

The product can be applied by:

• Spray: Use airless spray
• Nozzle tip (inch/1000):15-19
• Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
• Roller: May be used - care must be taken to achieve the specified dry film thickness.

Our Jotun 2 Pack Products, the pricing includes BOTH Paint and Hardener as a package.

Drying

Drying and curing times are determined under controlled temperatures and relative humidity below 85%, and within the DFT range of the product.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks, imprints or other physical damage.

Dried to over coat, minimum: The shortest time allowed before the next coat can be applied.

Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal tackiness. Dry sand sprinkled on the surface can be brushed off without sticking to or causing damage to the surface.

Dried/cured for service: Minimum time before the coating can be permanently exposed to the intended environment/medium.