Satisfaction Guaranteed Baileigh Industrial - 220v 3phase Heavy Duty Hydraulic Shear. 52" Length 10 Gauge Mild Steel Capacity For Home [SneiqxmF]

Baileigh SH-5210-HD Heavy Duty Hydraulic Shear Features:

• 52” length.
• 10 gauge mild steel maximum capacity.
• Minimum capacity of 24 gauge mild steel.
• 7.5 hp motor runs on 220-volt 3-phase power.
• Industrial-grade hydraulic system is located in the front for easy fluid changes.
• 35 to 47 strokes per minute for speedy production.
• Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction.
• Manually adjustable 23.62” backgauge ensures precise repeatability.
• Heavy duty table with roller bars slides material into the machine more easily.
• Side gauges keep the cut at 90° (if you so choose) without you needing to make a guiding line on the material.
• Switch between 3 modes as needed:
• Jog mode: Inching the blade down to the material.
• Single cycle mode: One cut for one pedal push.
• Automatic cycling mode: Continuously cutting for production runs.Adjustable rake angle dial makes it easy to
• fit your material thickness to minimize burr and put less strain on hydraulics.
• Convenient blade gap adjustment lets you eliminate folding and twisting.
• Comes standard with high carbon chromium blades.
• 2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money.
• Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
• Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
• Shadow line creates a reference line on the material so you know exactly where the cut will be.
• The SH-5210-HD plate shear is covered by a 1-year parts warranty.

Baileigh SH-5210-HD Specifications:

• Item Number: SH-5210-HD
• Blade Rake Angle: .5 to 2.0 degrees
• Back Gauge Length: 23.62"
• Shear Length: 52"
• Motor: 7.5 hp
• Thickness (SS): 10 ga. (13 ga.)
• Strokes Per Minute: 35 – 47
• Front Gauge Length: 39.37"
• Blade Angle: 1/2° – 2° Adjustable
• Blade Gap Adjustment: Manual, Lever Acuated
• Power: 220V / 3-phase
• Shipping Weight: 4200lbs
• Minimum Material Thickness: 24ga
• Shipping Dimensions (Inches): 88x45x66