Wholesale Slotted Pvc Filter Suction Hose Assembly: 3/8" All-flo Pump For A Limited Time [mJDiTcpO]

This is a non-collapsible suction hose for use with a 3/8” All-Flo air diaphragm pump or any pump with a 3/8” FPT suction/inlet port in these related industries. The inlet of the pump must be 3/8” FPT.

At least 12' long x 3/8” MPT crimped on a 3/4” inner diameter clear non-collapsible ag hose w/ slotted PVC filter. This assembly is comprised of an elbow for top draw from tank and to allow the user to fit the slotted filter end into a 55-gallon drum opening.

You must fabricate and provide the PVC sleeve to slip over the hose to the keep filter at bottom of tank. This assembly requires a 1” or 1 1/4” sch 40 PVC pipe.

Do not hard pipe plumb this filter. Must be able to remove filter for cleaning.

***Rex, the Pump Guru, invented this slotted filter for use with sodium hypochlorite.***

FYI:

The general rule of thumb when plumbing a pump is as follows:

Double the hose inner diameter in comparison to the pump inlet and always use non-collapsible hose.

SKU: AG12TF06-D