Best Quality Jac2512-pc - Schauer 12v, 25a Aircraft Power Supply & Fully Automatic Battery Charger With Piper Plug And Battery Clips ~ Limited Availability [AVtMxFkw]

Schauer JAC2512-PC - 12V, 25A Aircraft Power Supply & Intelligent Electronic Charger with Piper Single-Pin Plug and Battery Clips

Avoid draining the battery in your aircraft while you conduct ground avionics training, familiarization, maintenance or download updates. The AC cord goes to a standard wall outlet, and the Piper style plug goes to the external power outlet on your flying machine, providing ground power and eliminating worries about a dead battery while you've got all the switches on. When you're done, swap the plug for the included battery clips and hook it up to your battery - it also functions as a Fully Automatic Electronic Battery Charger with Float/Maintenance Mode. This charger may be left connected for extended periods without damaging your battery. The JAC2512-PC is for aircraft with 12V (14V) electrical systems, and which use a Piper style single-pin aircraft plug.

The Schauer JAC2512-PC is both a 12V Power Supply and a Fully Automatic, 3-Stage Electronic Charger with a gray SB50 connector on the 96" DC Lead. Unlike the standard JAC2512, this unit will supply 12V DC output without any voltage sensed at the DC leads.

The JAC2512-PC will charge any type lead acid battery, including conventional flooded cell, maintenance free, deep cycle, gelled-electrolyte, or AGM valve regulated batteries. The 3-Stage Charge Control provides Modified Constant Current Charge to a constant finishing voltage, then to a float/standby voltage to maintain the battery in a fully charged condition.

The JAC2512-PC features a heavy-duty aluminum case with mounting flanges. Multi-Voltage AC Input via 115V/230V selection switch on base. Supplied with a 72" grounded North America AC input cord equipped with IEC C13 plug for connection at the charger. For international use, simply replace with an AC cord equipped with a locality-appropriate mains power plug and IEC C13 connector.

Features

- MAY BE USED AS A 12V DC POWER SUPPLY
- Operate avionics on the ground (not meant for engine starting)
- Includes Piper style Single-Pin Female aircraft plug, and battery clip adapter
- Low voltage start: will start charging a deeply discharged battery with ZERO terminal voltage
- Fully Automatic with Float/Maintenance Mode
- May be left connected to batteries indefinitely
- Charges all types of lead acid batteries
- 115/230VAC Multi-Voltage Input (voltage selection switch on underside of base)
- Multiple DC Lead Adapters Available
- Mountable, Aluminum case with LED status lights
- Current limiting
- Short Circuit and Reverse-Polarity protection (user-replaceable fuse)
- Capable of full current at 12.6V continuous - 100% duty cycle

- MAY BE USED AS A 12V DC POWER SUPPLY
- Operate in an environment with proper ventilation
- Do not operate in a damp or wet environment

LED Status Indicator Light in normal charge cycle:
- Upper LED (Power): RED – AC power connected, Power Switch ON
- Lower LED (Equalizer): OFF - Charger Not Connected or Connected and minimum battery voltage not sensed
- Lower LED (Equalizer): YELLOW – Charging stages Bulk and Absorption - cooling fan active
- Lower LED (Equalizer): GREEN – Green – Battery charged, Charger in Maintenance Float mode
- Flashing Red & Green LEDs: Safety Timer shut off function