The Brazilian Shaker cabinet collection is a warm espresso finish which will make any space feel welcoming. These cabinets will add a modern touch to your home due to its clean lines and dark coloring. These cabinets are full overlay doors and come with beautiful dovetail drawers and soft closing drawer features

Features

Name: RTA Brazilian Shaker 48 x 36 Finished Back Panel-Cut in Half
Brand: mappa-mercia.org
SKU: HBS7289605206
Price: 49.99 USD
Availability: InStock
Rating: 4.67 (867 reviews)

Finished back panel.
Commonly used to finish the back of an island.
Grain will run vertically (along the height).
Cut in Half

Specifications

Item Number	FBP483614-1-AP-Cut in Half
Dimensions	Width 48" \| Height 36" \| Depth .25"
Style	Shaker
Face Frame	3/4" Solid Wood
Door Frame	3/4" Solid Wood
Door Center	MDF with Wood Veneer (MDF is used to avoid cracking/warping)
Door Frame Width	3"
Center Panel Beveled Edge	No
Sides	1/2" A-Grade plywood with wood veneer
Top & Bottom (Wall)	1/2" A-Grade plywood with wood veneer
Bottom (Base)	3/8" A-Grade plywood with wood veneer
Back Panel	1/2" Picture Frame Recess Style
Shelves	3/4" A-Grade plywood with wood veneer
Base Cabinet Shelf Depth	45293
Drawer Box	Solid Wood 17mm (close to 3/4") sides, Drawer bottom 3/8" plywood, Drawer length 21". Dovetail construction, Natural finish.
Drawer Glides	Undermount, full extension with soft closing feature
Base Corner Supports	Wood corner brackets with wood I-beam construction
Overlay	Full with butt doors
Hinges	Concealed 6-way adjustable with Soft Closing Feature
Cabinet Interior	Matches door finish
Center Stile	No center stile on cabinetry 24"W to 36"W
Assembly Method	Steel Clip
Finish	Waterborne UV Finish from Sherwin Williams
Toe Kick	1/2" Plywood (sides of the toe kicks will be unfinished)
Installation Rail	1/2" Plywood
Wall Cabinet Bottoms Finished (Exterior)	Yes
CARB Compliant	Yes
Door Hinges	Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This)
Toe Kicks Included w/Base Cabinets	Yes
Sides Panels Finished	Yes
Installation/Design Note	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards Schematic imagesand renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above.