Name: The Perfect Simpson Strong-tie Cpfh09kt (9 Oz.) Crack-pac Flex-h2o Polyurethane Crack Sealer Injection Kit (2 Cartridges) Instant 30% Discount [wLrxRdB6]
Brand: mappa-mercia.org
SKU: HBS7194063006
Price: 33.99 USD
Availability: InStock
Rating: 3.56 (906 reviews)

Simpson CPFH09KT Description

The Crack-Pac Flex-H2O polyurethane injection resin seals leaking cracks, voids or fractures from 1/32" to 1/4" wide in concrete or solid masonry. Designed to perform in applications where water is seeping or mildly leaking from the crack, the polyurethane is packaged in the cartridge and an accelerator is packaged in the nozzle.

Simpson CPFH09KT Includes

(2) Crack-Pac Flex-H2O cartridge/nozzle sets
(12) E-Z-Click injection ports
(2) E-Z-Click injection fittings with 12" tubing
(1) Pint of ETR paste-over epoxy (8 oz. of resin + 8 oz. of hardener)
(4) Disposable wood paste-over applicators
(1) Pair latex gloves

Simpson CPFH09KT Features

Can be dispensed with a standard caulking tool
Can also be used on dry cracks if water is introduced to affected area
Can be used with a reduced amount or without accelerator to slow down reaction time
Expands to fill voids and seal the affected area
Fast reacting — reaction begins within 1 minute after exposure to moisture; expansion may be completed within 3 minutes (depending on the amount of moisture and the ambient temperature)
20:1 expansion ratio (unrestricted rise) means less material needed

Simpson CPFH09KT Applications

Sealing cracks ranging from 1/32" to 1/4" wide in concrete and solid masonry
Repair of cracks in dry, damp, and wet conditions
Applications where water is seeping or mildly leaking from the crack

Simpson CPFH09KT Installation Overview

Condition resin and hardener to 60°F (16°C) to 90°F (32°C) before mixing
Use 30:1 resin to catalyst ratio for standard reaction time
Add more catalyst for faster reaction time; use less for slower reaction time

Simpson CPFH09KT Specifications

Clean Up	Uncured material — Wipe up with cotton cloths. If desired scrub area with abrasive, water-based cleaner and flush with water. If approved, solvents such as ketones (MEK, acetone, etc.), lacquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material — scrape or brush off surface with a putty knife or wire brush. Tip: wetting the concrete or masonry surface immediately prior to injection will make cured resin easier to remove.
Usage Temperature	60°F to 90°F
Color	Polyurethane — clear, accelerator — green, cured — green
Storage Conditions	For best results, store in a dry area between 45°F (7°C) and 90°F (32°C). Product is very moisture sensitive.
Shelf Life	12 months from the date of manufacture, unopened