Compact 4zmd-250 Zoned External Multi-drive Controller Cyber Monday Only [T5tDs3YB]

Smart Vision Lights 4ZMD Description

The 4ZMD is an external driver with four individual built-in channels, allowing control of up to four zones within a single light or four individual lights with no built-in drivers. Users can set different intensity levels for each zone channel because they act independently of each other. Also, depending on the channel’s configuration, intensity controls can adjust the intensity for either continuous operation or OverDrive^™ strobe mode.

When connected to the LED Light Manager (LLM), each individual channel can be set to continuous operation, off, any intensity level in between, and even OverDrive^™ strobe mode.

Smart Vision Lights 4ZMD Technical Specifications

4WMD Specifications Standard (Per Channel)

Smart Vision Lights 4ZMD-250 Technical Specifications

OUTPUT PER CHANNEL (MAX)

Maximum LED Continuous Current	250mA
Maximum LED OverDrive Current	2A

OUTPUT PER CHANNEL (MAX)

Continuous Input Current	800mA
Continuous Input Power	19.2 W
OverDrive Input Current	6.4 A
OverDrive Input Power	154 W

Managing Zones

Connect the LED Light Manager (LLM) to the 4ZMD driver. The LLM allows for easy control of each individual zone. The event programmed within the LLM can contain multiple sequences, each with the ability to set its zone to continuous on, off, any intensity level in between, and even OverDrive™ strobe mode.

For more information about how to use the LED Light Manager (LLM), see the LED Light Manager data sheet

Understanding Zones

Smart Vision Lights offers lights with four individual built-in zones, allowing each zone to act independently of one another. Each zone can be set to continuous on, off, or any intensity level in between, and even OverDrive™ strobe mode. Intensity levels can be set by programming the LLM to control the zones or by using the intensity controls on the front of the 4ZMD (see Managing Zones and Adjusting Intensity).

These four-zone lights enable any combination of the zones to be turned on at the same time, including adjacent and opposing zones.

Adjusting Intensity

The 4ZMD allows for the control of up to four individual channel intensity levels. Depending on how the channel is wired, its intensity can be adjusted for either continuous operation or OverDrive strobe mode. Each channel intensity can be adjusted either in continuous operation or OverDrive strobe mode, but not both modes simultaneously. Each channel has a yellow indicator light that will illuminate when the channel is active.