Official Adapter | Machine Side John Deere 14 Pin To Attachment Side Cat D Series 14 Pin | Sg-jd14-ct14 | Skid Steer Genius - Limited Release [1S8GoCzl]

Here's a Genius idea.  Why not allow people with Caterpillar attachments run them on their John Deere Skid Steer Loader?  This adapter does just that.  Just plug one end into your John Deere Loader and plug the other into your attachment equipped with an 14 pin connector.  Turn on your machine and get to work.  This is another Genius product.  The best ideas at the best prices.

Note:  John Deere 14 Pin outputs 6 switched ports.  You will notice that this adapter has 7 pins installed.  Up/Down, Left/Right and right stick Up/Down are all that is available.  We do not provide the extra power port on pin K.  If you need this, please let us know and we can build it.

Note:  Cat 14 Pin outputs 6 switched ports if ordered.  You will need to check to be sure that you have buttons to operate this adapter.  We cannot be held responsible if your machine was not ordered with any controls.  You will notice that this adapter has 8 pins installed.  Up/Down, Left/Right and right stick Up/Down  Ground and +12 Volts.  We do provide the extra power port on pin K on this adapter. 2025 adapters have the K to P pin installed for dedicated switched power on the new 255/265 machines.  There is a hidden jumper included inside the female connector with shrink tubing over the pin.  Cut off the shrink tubing and you can insert the jumper into K or N to turn on your High Flow hydraulics in your CAT machine.