Lightweight Gemini Taurus 3 Ring Saw Blades Series [CLJjH2sr]

We have a variety of Taurus 3 Rings Saw Blades, including:

Dichroic Blade

Just for cutting thin Dichroic Glass. This blade has the popular slim blade design with a fine diamond grit that will not chip the delicate dichroic finish! Also works well with iridescent coated glass allowing you to form intricate shapes with perfect edges. Clean edges mean lower temperatures and faster firing times for kiln fired jewelry, creating a clean professional look.

Standard Blade

For general use, it's omni-directional. The Standard blade gives you strength as well as versatility in all materials. Because the blade is round you have the ability to cut in any direction. The 360 degree diamond coating allows the blade to cut quickly while grinding the edge, leaving it smooth.

Separating Blade

For internal cuts, it's omni-directional. The Separating blade is the same size as the Standard blade and has exactly the same cutting action. The difference is that the Separating Blade is made from a stainless steel wire that is coated with the same high quality process as all our blades and then has a coupling attached to it which is also coated for protection and smooth action. This blade gives you the ability to open the blade, slide it through, reattach and make internal cuts with no entry point.

Slim Blade

For the most intricate designs, it's omni-directional. The Slim blade offers the most intricate cutting ability of all the "Ring Blades". Because of the Slim blade's diminutive size, it has greater ability to create intricate designs and is ideal when cutting non-ferrous metals but at the same time takes away strength so it is recommended only when its size is beneficial.

Mega Blade

For dense materials. Because of its "tear drop" shape, the Mega Blade is our strongest blade ever. To date, no one has been able to break one. This blade is used differently than the Omni-directional blades. It cuts mainly on the front and back, so to create a curve you will guide the material around the blade.

The Mega blade is so rigid that it has the ability to damage the saw itself if used improperly by pushing too hard. So keep in mind the "golden rule" to let the saw do the cutting and do not force the material.

Slicer Blade

Thinnest curf ever for Taurus 3. The Slicer blade is ideal when removing the least amount of material is desired. This blade gives you the ability to use more of your material and as a byproduct actually cuts faster than any of our "Ring Blades".

The Slicer blade is flat, giving it strength when cutting forward and backward. Because of this, the cutting will only be from the front and back. Cutting from the sides will not only be very slow but will damage the grommets.

FREE Shipping!