Compact Titon Hrv Cool Plus Floor Mounted Holiday Cheer Edition [VUq7vu2T]

The new Titon HRV Cool Plus™ TP755 Floor Mounted unit offers a solution designed to deliver cooling, filtered air for user comfort in warmer weather conditions. It seamlessly integrates into heat recovery ventilation systems, boasting easy installation, intuitive control and effortless maintenance. 

Equipped with an integrated cooling module, the HRV Q Plus/MVHR system enhances its performance by pre-cooling incoming fresh air during warmer months. By merging improved air quality and energy efficiency, MVHR systems with cooling modules greatly aid in creating sustainable and comfortable indoor environments, while also aligning with Approved Document O (ADO) guidelines by recycling energy within a home.

• Up to 3.3kW total cooling (subject to volume flow and relative humidity)
• Available for wall mounting or floor mounting. When using the wall bracket the supporting wall must be suitable for the combined weight of the cooler, MVHR, bracket assembly. (100 kg Wall / 106 kg Floor)
• Minimal maintenance of fully sealed refrigerant heat pump with coil & fin heat exchangers. Similar to a fridge or freezer. Proven & reliable. Refrigerant is R407c (GWP 1774)
• Heat cell will provide cooling assistance to pre-chill incoming fresh air when in operation exactly as it does normally with heat
• Installation below the ceiling in the heated space but compact enough to permit the location of a washing machine below
• Port sizes are 160mm
• CIBSE accredited CPD course available on Part O

Operation Cycle

• Pre-set temperature inside the dwelling is reached
• MVHR increased speed to cooler boost
• Once achieved the cooler will start
• Pre-set tempered internal temperature reached
• Cooler will deactivate
• MVHR decreased to continuous levels

Additional Controls

• Optional manual mode via the onboard aura-t™
• Minimum atmosphere temperature controls to ensure the cooler doesn’t operate with the dwelling heating system
• Cooler can be deactivated via the thermostat and/or onboard aura-t™

How

• Thermostat in Cooling Mode
• MVHR atmospheric temperature sensing
• Sufficient airflow for cooling operation automatically set by our controls
• Internal pressure sensors ensure cooler operates only when sufficient airflow is maintained
• Active communication between MVHR and Cooler

Specification

Wall mounted – 704mm wide x 515mm deep x 1430 high (excluding ports).  Weight 100 kg
Floor mounted – 704mm wide x 515mm deep x 2005 high (excluding ports). Weight 106 kg

Weight: Wall mounted 100 kg, Floor mounted 106 kg.
Finish: White Paint (RAL9016 Semi-gloss Traffic White)

Materials:
Housing: Zintec sheet steel housing, powder coated white
Internals: Expanded polypropylene (EPP)
Heat exchanger: Made from high quality PET materials
Internal insulation: Closed cell foamed Nitrile rubber, class ‘O’ fire rating
Standard filters: Grade ISO Coarse 85% (G4) synthetic filters.

Electrical:
HRV Unit: 230V ~ 50/60Hz, 5A fuse
Cooler: 230V ~ 50/60Hz, 8A fuse