Most Popular Wilgard® Lt End-of-aisle Rack Protector Best Choice [2UhL1YFo]

Wilgard^® LT Rack Protectors are ideal for lighter-duty rack protection applications and can provide an extra measure of safety in your back-room storage facility, warehouse, or distribution center. The rack protectors can help avoid damage to expensive racks and inventory, while protecting you from costly facility repairs and downtime. They are available as individual ‘Right-’ or ‘Left-Side’ rack protectors, or as a combined ‘Double-Headed’ rack protector.

Wilgard^® LT rack protectors are “Made-in-the-USA” and have a durable, safety yellow paint finish that can take the punishment that carts, pallet jacks and lighter-duty forklift trucks dish out every day. When properly anchored to your concrete floor with the included 1/2” x 5” Wedge Bolts, Wilgard^® LT end-of-aisle rack protectors will help guard your investment without affecting aisle traffic flow patterns.

• 'Right' or 'Left' rack protectors available from stock
• Economical, lighter-duty solution for protecting standard 42” and 48" wide rack
• Custom length LT rack protectors also available
• Specially Formed Head 8" H by 1/4" thick
• Angle 3" W x 5" H x 1/4" thick
• 48" extension angles are in stock, custom lengths available. Average lead time for custom is 2 weeks
• Three 1/2” x 5” anchors (1 Pkg.) included with Wilgard® LT rack protectors and extension angles
• Lift-Out Guard Rail:  4 ft., 6 ft., 8ft., and 10 ft.  (Measured center-of-column to center-of-column)
• Common Column Post used for Lift-Out or Bolted Rail systems. (Lift-Out Triple Rail not available)

Component	Part Number	Overall Length	Weight (includes hardware)
42" Right Side Protector	WRPLT42-R	45"	30 lbs.
42" Left Side Protector	WRPLT42-L	45"	30 lbs.
48" Right Side Protector	WRPLT48-R	51"	35 lbs.
48" Left Side Protector	WRPLT48-L	51"	35 lbs.
48" Extension Angle - LT	WRPLT48-EXY	47 1/2"	27 lbs.
1/2” x 5” Anchor Pkg. (3 anchors)	WGR-PLHP	N/A	1 lb.

Double-Headed Specifications

• Convenient one-piece custom rack protector design
• Available for standard rack widths of 42" and 48”
• Custom length LT rack protectors also available
• Unitized construction speeds installation and provides lighter-duty impact protection
• Dual Formed Heads are 8" H by 1/4" thick
• Angle 3" W x 5" H x 1/4" thick
• Three 1/2” x 5” anchors (1 Pkg.) included

Component	Part Number	Overall Length	Weight (includes hardware)
42" Double-Headed Protector	WRPLT42-D	49"	39 lbs.
48" Double-Headed Protector	WRPLT48-D	54 1/2"	42 lbs.
1/2” x 5” Anchor Pkg. (3 anchors)	WGR-PLHP	N/A	1 lb.

Download Spec Sheet