Member Exclusive Smd Cc-1 Steve Meade Designs Amplifier Crossover Calibrator Money-back Guarantee [efB1V7DN]

• Should the harness become damaged it is easily replaceable or repairable in the field
• Isolating the CC-1 from the vehicle's electrical system for power, guarantees that it will only measure what it is supposed to measure
• It makes it pretty easy to measure the output of a head unit directly if you choose to do so

Member Exclusive Smd Cc-1 Steve Meade Designs Amplifier Crossover Calibrator Money-back Guarantee [efB1V7DN]

Most modern car audio amplifiers have a built-in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. Enter "Competition Mode" and easily match gains on any 4-channel amplifier or even multiple bass amplifiers. This is VERY important when using subwoofers that share a common chamber, especially if you have 2 (or more) amplifiers on a dual voice coil driver.

This listing includes:

(1) Crossover Calibrator (CC-1)

(1) Calibrated Test tone CD

(1) Harness

(1) Manual

Feature:

- Isolating the CC-1 from the vehicle's electrical system for power, guarantees that it will only measure what it is supposed to measure; the audio signal,  not noise in the charging system

- It makes it pretty easy to measure the output of a head unit directly if you choose to do so

- Should the harness become damaged it is easily replaceable or repairable in the field

Specification:

The Crossover Calibrator's circuitry is digital microprocessor controlled

Crossover -3dB point accuracy +/- 0.25dB

Low Battery LED trigger battery voltage Less Than 6.5Vdc

Auto-shut off timer 8 - 10 minutes after ON button is pressed