Durable Ds18 10" 400watt 4 Ohm Loaded Ported Enclosure W/ Amplifier And Amp Kit Lse-110a Now 95% Cheaper [9JXDlOCa]

Durable Ds18 10" 400watt 4 Ohm Loaded Ported Enclosure W/ Amplifier And Amp Kit Lse-110a Now 95% Cheaper [9JXDlOCa]

Looking for that perfect bass package but are overwhelmed by all the options? We have made it easy with our loaded subwoofer box the LSE110A! This is a prefabricated box that comes with one of our best selling subwoofers. Included is a beautiful carpeted box with DS18 logo designs tuned to 42 Hz. The box is constructed by thick 1/2 MDF for great sound and resonance. The sub included is the very popular MD10 that is a single voice coil 4 ohm sub with a nominal impedance of 4 ohms and can handle up to 400 watts. This loaded box is a great entry level solution to hard hitting heavy bass for all to enjoy.

This listing includes:

(1) S-1500.1 Amplifier

(1) SLC-MD10 Subwoofer Loaded Ported Box

(1) 4-GA Amp Kit Which Includes:

- AGU Fuse Holder with AGU-100A

- 6ft. 4GA Loom Tube

- Rubber Grommet

- 17ft. Red power cable: 21mm od: 10mm

- 3ft. Black ground cable: 21mm od: 10mm

- 17ft. Red/black twisted RCA cable

- 17ft. Turn-on cable: 20*0.15mm

- 17ft. Red/black speaker cable: 1.31mm x 2 wires od 3.2 x 6.4mm

Features:

- The box is constructed of 1/2 inch MDF for great strength, resonance, and tuned to 42hz for low hitting bass.

- One SLC 10-inch sub will give you the cone area to push out great-sounding bass without a lot of power requirements.

- Great design and carpeting with DS18 logos to give your system the flair it deserves and also bring a show-quality look.

- Great durability so you can enjoy hard-hitting bass for years to come.

General Specifications:

Speaker Size: Single 10"

Total Impedance: 4 ohms

Total RMS Power Handling: 200 watts

Total MAX Power Handling: 400 watts

Sensitivity (1w/1m): 90 db

Frequency Response: 35-250hz

Recommended Lo Pass Crossover:90Hz

Amplifier Specifications:

Model: S-1500.1

Circuit Topology: Class AB Monoblock Amplifier

RMS Power Output @ 2 OHMS: 350 watts

RMS Power Output @ 4 OHMS: 220 watts

Total Harmonic Distortion: Less Than 3%

S/N Ratio Ref 1w @ 4 OHMS: More Than 90 db

Gain Range: 0.2-6V

Crossover Range: 50-250hz

Frequency Range: 20Hz-500 Hz

Dimensions: 13.7"/348mm x 5.8"/148mm x 1.8" / 47.5mm

Subwoofer Specifications:

Model: SLC-MD10

Type: Subwoofer

Size: 10"

RMS Power: 200W

MAX Power: 400W

Impedance: 4 Ohms

Voice Coil Size: 2"

Magnet: Ferrite

Magnet Size: 32 oz

Voice Coil Diameter: 2"

Voice Coil Former Material: Aluminum

Cone Material: PPI

Surround Material: Rubber

Basket Material: Steel

Magnet Material: Ferrite

Magnet Weight: 32 oz.

Box Specifications:

Port Tune: 42Hz

Internal Volume: 34L

Load Configuration: Front Ported

Box Material: 1/2" MDF

Finish Material: Carpet

Dimensions/Measurements:

Height: 13.78" / 350mm

Width: 15.75" / 400mm

Depth 1: 11" / 280mm

Depth 2: 14" / 356mm